DudeUser

It is gone when i increasing the wall thickness from 2 to 3 wall lines.

Hey, does this look normal? I mean the orange and the small gaps. I have also some gaps at this position in my prints.

At least i made it. With the same settings and normal fill overlap (15%). I just used another software to create the 3D-model. Although I find no fault in the blender file but whatever. Btw: is there a way to reduce the moving lines?

Yes everything was the same even the position. I googled a bit and some say they print with 80-90% fill overlap and i tried this and it worked rlly good. But not sure if that is a good option.

Oh man, now i tried the normal version with the same settings like the small test piece and i have the same problem like before.

So new settings with better result but rlly slow. Temps: 190C, how fast can i print with this? I would try it but i didn't have enough filament.

Here the new settings with the same result: temps 210C fill is 40% not 100%

I might be wrong but for me 1.2mm is a multiple of 0.3 or i don't understand what you mean. I will try this things.

Hey, I i have one problem with my print. How can i close this gaps? Settings: REC PLA White 2,85mm; 230 temperature Problem:

After i tried the boolean modifier again, and updated the stl file everything was good.

Hey, I printed an object with thickness of 1,4 mm but the print is just 1mm thick. The other measurements are correct.

U can try to increase the infill overlap value under expert settings.

Hey, i am using Blender since 1 year for photorealistic interior render and Archviz. Now i want to use it for 3D-print but i have a lot problems when it comes to precise and complex shapes. I know Blender is not a CAD programm but is there a way or must i learn a new programm like FreeCAD? I would like to stay with blender, because it is very comfortable to use for me.

How can i do this? I always print with brim.

Yes that is what i mean.

Hey, how can i avoid this first line of filament when the print starts? It is alwas in my prints and doesent look good. When i print the Ultimaker Robot the printer makes a small border and then starts the print so there is no small line in the print. I hope you can understand what i mean.

Norton has no problem with Cura 2.1.2.

Thank you gr 5, worked perfectly.

Does not help. No click, still loose fit. Pretty annoying when changing filament.

Ok, thank you. I am still a noob in 3D print:D I will send it back and order 2.85 filament.

I orders 3 rolls of filament with 1.75 mm can i print this with my Ultimaker 2+ and what should i change anything settings/feeder?

Hey, i have a problem with my Ultimake 2+ the power cord has a rlly loose fit. One move and the power cord falls down. I tried to push out the little nipples but it doesent help.

Which filament is heat resistant and has fire protection class B1? For Ultimaker 2+

isopropyl alcohol has made it worse then has stuck nothing. With the glue stick and a damp cloth it worked.

Hi, i have the Ultimake 2+ since last weekend and always the first layer looks bad. I tried to calibrate the bed new, increase the tempeture from 60 to 70 degrees, lower the first layer printspeed to 20mm/s. Edit: it is PLA the silver from Ultimaker Pictures: