Jump to content

muraterciyas

Member
 View Profile  See their activity

  • Posts

    19

  • Joined

  • Last visited

 Content Type 

Posts posted by muraterciyas

    Ultimaker S5 stuck with ER998 after updating firmware to 8.1.0

    in UltiMaker 3D printers

    Posted

    Dear Digitamem, thank you for sharing this info, in my case it did not work and I had to take my S5 to tech service and paid 100euro to be fixed, but after the fix i am having problem with the auto leveling. The printer is checking the level first with nozzle 1 then 2 after this step it checks all plate first with nozzle 1 but when it comes to nozzle 2 after checking the second or third point it gives error

    Ultimaker S5 70 days/2000m PLA printed AA 0.40 Nozzle Not Extruding

    in UltiMaker 3D printers

    Posted

    16 hours ago, gr5 said:

    I've never had an AA 0.4 core that clogged or needed cleaning.  The most common problem that *seems* like a clogged core is the front fan - over many months of cleaning, tiny threads of filament get in the fan and eventually clog the fan.  It's easy to keep printing and not notice and the symptom is that the filament gets stuck in the area of the core under the heatsink.

     

     

    With which material are you printing AA 0.40, and did you ever replaced the nozzle? I mean how many hours did you used without cleaning and clogged free?   what can be the average lifespan for PLA. (9000m 410d 21h is this an exception)

    Thank you very much

     

    Ultimaker S5 70 days/2000m PLA printed AA 0.40 Nozzle Not Extruding

    in UltiMaker 3D printers

    Posted

    We did start with Ultimaker 2 then 2+ extended etc... and now we have 2 S5 and 1S3, we are printing average 8kg PLA+Breakaway each month. All print cores needed to be replaced by time, maximum we were able to use was 410 Days 21 Hours (10K Hours) with 9024 meter. I believe we are lucky that all 3 Ultimakers are working like clock, but these last nozzles we are not happy as I mentioned at the beginning, with Dustins feedback I changed the temp from 200C to 210C for the last 5 hours, it looks like it is working, I hope changing the temp will be enough to solve my problem.

    Ultimaker S5 stuck with ER998 after updating firmware to 8.1.0

    in UltiMaker 3D printers

    Posted

    Dear All,

    Our Ultimaker S5 (R1), is not responding after installing firmware 8.1.0. On 21st of February after completing a print, The printer asked to upgrade the firmware to 8.1.0. I clicked yes, after installing the firmware the printer rebooted and I see the ER998 message on screen. I have been trying to reinstall firmware with the USB right after restarting the printer but after 10 seconds I do get the same error message, I did try turning off/on, I did try unplugging power+network through the night, I did file a case to Ultimaker support. I did try to find a solution through the web. As a result I can not use S5 Printer, I can not connect to the printer, when I restart the printer for 10 seconds I can see normal menu but then getting the same message.

    Am I the only one having this problem? Can anyone help me.

    Thank you very much, 

    Murat

    S5-ER998.jpg

    Do not send Notification to my mobile/ipad

    in UltiMaker 3D printers

    Posted

    Hi,

    After installing the app to your mobile phone or ipad, you subscribe to notifications. 

    So when you send a print to S5 you receive a message saying the print started,

    and you receive another message when the printing is completed even if you are not connected to the same network,

    I could not figure out why but for the last week or so I do not receive these notifications, I did uninstall the app and re install the app but did not work.

    Does anybody have any idea about resolving this problem.

    Thank you very much.

    Murat

    Which one to buy

    in Buying or selling your UltiMaker

    Posted

    I increased the platform heat to 110c. The printer was in the workshop with no heat (average 14c room temperature) I moved the printer inside the office with 22c room temperature, I do have a front door and I coveredthe top, after these changes I did manage to print both ABS and PC.

    thank you very much.

    • Like 1

    Which one to buy

    in Buying or selling your UltiMaker

    Posted

    In my exprience, it is never offered as an alternative for Ultimaker. Ultimaker can print water soluble support material, but raise is still in trial for water soluble support material. Ultimaker has changable print heads, and you can print with a greater variety of material. We started 3d printing with up and added ultimaker 2 with the expectation of the second print head add on, then upgraded to 2+ extended. We are more than happy with pla printed parts. And never had an issue with 2+extended with pla filament. May be we need advise for printing PC or ABS. Please feel free to guide us.

    Which one to buy

    in Buying or selling your UltiMaker

    Posted

    While printing, average 120 gram parts for working prototypes, with u2+ , PC filament and cura recommend Settings, the parts are deforming while printing, I couldnt manage to print good parts. and also if I use ABS, while the parts are cooling down the parts are cracking and shrinking. I could not sucseed like printing pla that is why I am thinking to buy a second ultimaker. And ofcourse raise 2 can not be an option.

    Which one to buy

    in Buying or selling your UltiMaker

    Posted

    Dear all,

    We are using Ultimaker 2+ Extended for several years with no problem at our office.

    Now we do need to buy a second 3d printer with the capability of water soluble support material for better quality prints.

    We were planning to buy Ultimaker 3 extended. Then my partner asked why not Ultimaker S5?

    So I could not decide what to do? is there any body using both 3 and S5. Is there a huge differance?

    Should I pay 20% more and buy S5?

    Thanks

     

     

×
×
  • Create New...