Jump to content

Gambody_3D

Dormant
  • Posts

    24
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by Gambody_3D

  1. Version 1.0

    859 downloads

    This model was tested in Cura 2.3.1. To avoid printing problems, we recommend the following settings: Quality Layer Height: 0.1 mm Initial Layer Height: 0.3 mm Line Width: 0.4 mm Wall Line Width: 0.4 mm Outer Wall Line Width: 0.4 mm Inner Wall(s) Line Width: 0.4 mm Top/Bottom Line Width: 0.4 mm Infill Line Width: 0.4 mm Skirt/Brim Line Width: 0.4 mm Support Line Width: 0.4 mm Shell Wall Thickness: 0.8 mm Wall Line Count: 2 Top/Bottom Thickness: 0.8 mm Top Thickness: 0.8 mm Top Layers: 8 Bottom Thickness: 0.8 mm Bottom Layers: 8 Top/Bottom Pattern: Lines Outer Wall Inset: 0 mm Compensate Wall Overlaps: Check Compensate Outer Wall Overlaps: Check Compensate Inner Wall Overlaps: Check Horizontal Expansion: 0 mm Z Seam Alignment: Shortest Infill Infill Density: 25% Infill Line Distance: 3.2 mm Infill Pattern: Grid Infill Overlap Percentage: 10% Infill Overlap: 0.04 mm Skin Overlap Percentage: 5% Skin Overlap: 0.02 mm Infill Wipe Distance: 0.1 mm Infill Layer Thickness: 0.1 mm Gradual Infill Steps: 0 Infill Before Walls: Check Material Enable Retraction: Check Retraction Extra Prime Amount: 0 mm3 Retraction Minimum Travel: 0.8 mm Maximum Retraction Count: 90 Minimum Extrusion Distance Window: 6.5 mm Standby Temperature: 175°C Nozzle Switch Retraction Distance: 16 mm Nozzle Switch Retraction Speed: 20 mm/s Nozzle Switch Retract Speed: 20 mm/s Nozzle Switch Prime Speed: 20 mm/s Speed Print Speed: 60 mm/s Infill Speed: 80 mm/s Wall Speed: 30 mm/s Outer Wall Speed: 30 mm/s Inner Wall Speed: 60 mm/s Top/Bottom Speed 15 mm/s Support Speed: 60 mm/s Support Infill Speed: 60 mm/s Travel Speed: 120 mm/s Initial Layer Speed: 15 mm/s Initial Layer Print Speed: 15 mm/s Initial Layer Travel Speed: 30 mm/s Skirt/Brim Speed 15 mm/s Maximum Z Speed: 0 mm/s Travel Combing Mode: All Avoid Printed Parts when Traveling: Check Travel Avoid Distance: 0.625 mm Cooling Enable Print Cooling: Check Fan Speed: 100% Regular Fan Speed: 100% Maximum Fan Speed: 100% Regular/Maximum Fan Speed Threshold: 10 s Regular Fan Speed at Height: 0.3 mm Regular Fan Speed at Layer: 2 Minimum Layer Time: 5 s Minimum Speed: 10 mm/s Support Enable Support: Check Support Placement: Everywhere Support Overhang Angle: 50° Support Pattern: Zig Zag Connect Support ZigZags: Check Support Density: 30 % Support Line Distance: 1.3333 mm Support Z Distance: 0.1 mm Support Top Distance: 0.1 mm Support Bottom Distance: 0.1 mm Support X/Y Distance: 0.7 mm Support Distance Priority: Z overrides X/Y Minimum Support X/Y Distance: 0.2 mm Support Stair Step Height: 0.3 mm Support Join Distance: 2.0 mm Support Horizontal Expansion: 0.2 mm Use Towers: Check Tower Diameter: 3.0 mm Minimum Diameter: 3.0 mm Tower Roof Angle: 65° Build Plate Adhesion Build Plate Adhesion Type: Brim Skirt/Brim Minimum Length: 250 mm Brim Width: 8.0 mm Brim Line Count: 20 Brim Only on Outside: Check Mesh Fixes Union Overlapping Volumes: Check Special Modes Print Sequence: All at Once Surface Mode: Normal Experimental Extra Skin Wall Count: 0
  2. Version 1.0

    1,086 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  3. Version 1.0

    1,938 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  4. Version 1.0

    2,053 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  5. Version 1.0

    930 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  6. Version 1.0

    1,508 downloads

    Quality: Layer height - 0.1mm Initial layer thickness - 0.3mm Bottom/top pattern - lines Horizontal expansion - 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed - 50mm/s Outer shell speed - 30mm/s Inner shell speed - 20mm/s Top/Bottom speed - 20mm/s Support speed - 50mm/s Travel speed - 150mm/s Skirt speed - 30mm/s Amount of slower layers - 4 Infill: Infill Pattern - Grid Line distance - 3mm Infill Overlap - 20% Infill Layers - 0 Support Enable Support - check Placement - Everywhere Overhang angle - 30° X/Y Distance - 0.7mm Top Distance - 0.2mm Bottom Distance - 0.2mm Stair Step Height - 0.5mm Join Distance - 0.7mm Area Smoothing - 0.6mm Use towers - check Pattern - Lines Line distance - 1.5mm Platform Adhesion Type - Brim Brim Line Count -12 (up to 20, depending on the model’s height) The model’s parts have been test printed in PLA Recommendations All parts will arrange on the print bed in such a way as to get a clean printing, all basic settings by default.
  7. Version 1.0

    1,072 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  8. Version 1.0

    842 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  9. Version 1.0

    1,720 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  10. Version 1.0

    1,518 downloads

    Layer height: 0.1mm (for a clean result)* Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed: 20mm/s Top/Bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30 mm/s Amount of slower layers: 4 Infill: InfillpPattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers - 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2 mm Stair step height: 0.5 mm Join distance: 0.7 mm Area smoothing - 0.6 mm Use towers: Check. When removing secondary structure, the model remains clean. Pattern: Grid Line distance - 1.5mm (for higher detail fidelity and to avoid object deformation during printing) Platform Adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) All basic settings by default. Other recommendations: To make printing faster use layer height - 0.2mm for B1, B2, B3, B4, B5, B6, B8, B9, B10, B11, B12, B13, B14, B15, B16, B17, B23, B24, B25, leg parts, as they lack element detail. For other parts use 0.1mm to ensure high printing quality. Apply basic settings.
  11. Version 1.0

    1,016 downloads

    Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  12. Version 1.0

    3,710 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
  13. Version 1.0

    1,455 downloads

    Quality: Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setup: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation.
  14. Version 1.0

    2,363 downloads

    For a smoother and more quality printing, apply the following settings in CURA printing software: Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30 X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: Check Pattern: Lines Line distance: 1.0mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the models height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  15. Version 1.0

    8,302 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  16. Version 1.0

    3,139 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  17. Version 1.0

    1,856 downloads

    Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30 X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: Check Pattern: Lines Line distance: 1.0mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model's height Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  18. Version 1.0

    2,734 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm Initial layer thickness: 0.3mm Bottom/top pattern: lines Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). Speed setups: Infill speed: 50mm/s Outer shell speed: 30mm/s Inner shell speed; 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 100mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.0mm Platform adhesion: Type: Brim Brim Line Count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s setting apply to avoid model deformation. Other settings – by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  19. Version 1.0

    2,701 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  20. Version 1.0

    4,662 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  21. Version 1.0

    4,157 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Grid Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  22. Version 1.0

    1,475 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. Speed setups: Infill speed: 30mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 1.5mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  23. Version 1.0

    1,014 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers). *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double. The model has been tested and printed in PLA. In case you need advice where to get your filaments from, check our partner's website. Speed setups: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height) Other 3D printing recommendations: Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default. Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.
  24. Version 1.0

    1,441 downloads

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings: Quality Layer height: 0.1mm* Initial layer thickness: 0.3mm Bottom/top pattern: lines Skin perimeter line count: 0 Horizontal expansion: 0.04mm Speed setups for figure: Infill speed: 50mm/s Outer shell speed : 30mm/s Inner shell speed: 20mm/s Top/bottom speed: 20mm/s Support speed: 50mm/s Travel speed: 150mm/s Skirt speed: 30mm/s Amount of slower layers: 4 Speed setups for axes: It is recommended to print the axes at 0.1mm layer height. Infill speed: 50mm/s Outer shell speed: 20mm/s Inner shell speed: 20mm/s Top/Bottom speed: 20mm/s Support speed: 30mm/s Travel speed: 150mm/s Skirt speed: 20mm/s Amount of slower layers: 4 Infill: Infill pattern: Grid Line distance: 3mm Infill overlap: 20% Infill layers: 0 Support: Enable support: Check Placement: Everywhere Overhang angle: 30° X/Y distance: 0.7mm Top distance: 0.2mm Bottom distance: 0.2mm Stair step height: 0.5mm Join distance: 0.7mm Area smoothing: 0.6mm Use towers: check Pattern: Lines Line distance: 1.5mm Platform adhesion: Type: Brim Brim line count: 10 (up to 20, depending on the model’s height)
×
×
  • Create New...