VapeLounge

Ok, this is my first layer.

Could you share some photo's of what your first layer looks like? Thanks! Hi this is photo. What do you think?

Could you share some photo's of what your first layer looks like? Thanks! For now I made the adjustment by eye. The first layer looks perfect, we must see the measures of the piece if they are correct. Tonight I update you.

Hi gr5. I followed your guide, but with my printer seems to not work. When printing the first layer I see that there is little material in the platen.

Yes have glass.

Hi guys, I own Ultimaker 3 and unfortunately I can't calibrate the platen. Can someone help me. Thank you all.

Hello everyone. I called my dealer, with plenty of availability, send me all the spare parts to restore the printer. Very well I would say.

I know that I have to contact my dealer, but this question to find out why this happens. It is not normal to such a thing, especially when a printer costs 3600,00€.

Hello to all. Unfortunately I get back here talking to expose another issue concerning my Ultimaker 3. While I was doing a press, known of the extruder jumps, control and I see those cracks that are visible from the pictures that I post. I am sorry that this happens, I hope you can help me. Thank you.

Thanks for the reply. Now I will try your advice. If I can end the printing I'll let you know if everything went well.

Hello. They are not at all happy with this printer. I think to sell it as soon as possible.

Hello. How software uses Cura 2.3.1. The PVA I am using is the Formfutura, but also with the PVA Ultimaker giving me the same problems. The problem of yarn ruined I solved it by unscrewing the screw of the push thread.

Ok guys, I have bad news. I am printing an object, until a few minutes ago okay, now the PVA does not go out from the extruder. I am attaching a photo.

Sorry, I meant nozzle.

OK guys. I followed your advice and it works. But I will say one thing, the PVA is a material very dirty the nucleus? Another thing, when I cleaned the nucleus I saw which was spotlessly clean. There may be some other problem?

Hello. Many thanks for your interest, now I try and tell you how to proceed.

Help please.

Good morning everyone. I'm trying to print an object with PVA supports but. I have the following problems. When I enter the PVA in tie Advancer and the car drives him, at some point it seems that the motor turns but does not push the wire, well now I tighten the screw in such a way as to give more friction to the wire. Printing begins and it's okay for a while, at one point known that never leaves the PVA filament, control the thread and find it all eaten. Can you help me? Thanks to those who help me.

This reel is great. But I'm looking for something that does not require threaded rods or other hardware.

Hi guys. Do you recommend a great reel for the Ultimaker? I need to be able to use rolls of 1 kg. Thank you all.

Thx bro.

The combination of Cura with all the quality profiles and the UM3 and the Ultimaker materials is thoroughly tested. You will get excellent results in terms of print quality and reliability. Ultimaker sells an open system, and you can choose to use other filaments. No problem with me, but often that means you have to spend time on optimising print settings and dealing with failed prints, because materials from different suppliers have different properties. Hi friend. I checked the straps, one was slightly slow. I tried to pull it, it works, but then you loose the belt of the opposite side. So I don't understand where I'm wrong.

Provo a fare come consigli. Grazie.

Ok bro thx.