qwerty8224
-
Posts
64 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by qwerty8224
-
-
When forming the substrate, the print area is cut off.
-
Horizontal extension support not working. (((
-
On 02.10.2022 at 03:20, ansonl said:
Продавец на таобао продает цельнометаллическую версию хотэнда. Я заказал как тефлоновую, так и цельнометаллическую версии через superbuy и обнаружил, что цельнометаллическая версия работает лучше всего. Терморазрыв цельнометаллической версии представляет собой тонкую металлическую трубку вместо обычной версии, которая представляет собой металлическую оболочку большего диаметра с трубкой из ПТФЭ внутри. Я никогда не мог сделать так, чтобы терморазрыв PTFE не протекал.
На самом деле я дважды заказывал цельнометаллическую версию горловины, так как не знал, что это означает на странице продавца, а DW Dimensional space (продавец) улучшил цельнометаллическую терморазрывную часть, чтобы иметь шестигранный фланец вокруг резьбовой стороны терморазрыва, который подходит к нагревательному блоку. Теплоотвод и радиатор taobao имеют немного другую конструкцию, чем продукт Sanbrother на aliexpress, что требует небольшой модификации зажима DXU.
В какой-то момент мне придется написать пост о том, как купить и собрать DXU с деталями на таобао и UMO+.
give a link, on metal
-
13 minutes ago, MariMakes said:
Привет@qwerty8224,
У вас есть файл проекта для нас, который иллюстрирует вашу проблему?
Чтобы сохранить файл проекта, перейдите в Файл -> Сохранить проект.
Если у вас есть наглядный пример, я могу донести его до команды.
Спасибо 👼 -
Broken, the monotone order of the top layer (((
-
Why is the first nozzle printed inside the wiping tower? at 4.10 the seal was from the outside
-
3 hours ago, nallath said:
Я не понимаю, что вы имеете в виду. Что такое струйное сопло? Как Cura его чистит?
double extruder cleaning inactive nozzle on the tower
-
please check the cleaning of the jet nozzle,
It does not work for me. (((inactive
-
knows who disappeared where Author yyh1002?
-
-
according to my observations there are the most efficient 35x10 fans. If rips up the edges try playing with the line width I sometimes use 0.37 mm instead of 0.35 by default. also can you increase the speed up to 100 percent?
-
-
good afternoon firmware supports Linear Advance ?
-
Thank you for the project yyh1002 2021 the system works and brings pleasure and joy)))))
-
amazing project. I have been using it for 4 years with Bondtech Gears 1.75 5mm. thanks
-
Sorry, it was left out by accident. It's now there.
thank )))
-
For those of you who already bought the 3015 fans, there is still a fan shroud variant to use 3015 with v1.5.
Unfortunately I can not find it (((
-
7 minutes ago, smartavionics said:
Вы имеете в виду меня ?! Если так, спасибо.
Yes )))
-
О да вашейв😉your builds are wonderful))) keep up the good work))))
-
GR5
I do not want to offend you, but it seems to me that you are not pursuing a good goal - to say that one is better than the other, and give an example of the testing that was. You are an adult and should understand that these are two different approaches to cooling. I will explain to inexperienced people (like you)
UM2 (which has been tested) uses cooling on one plate, that is, 1 nozzle through this plate heats the other nozzle. DXU uses a separate cooling system for each nozzle. There is a separate radiator. Such a system costs UM3 and S5, and the temperature of the first or second nozzle is not connected to each other.
I think for a full understanding, you can just say that the cooling system costs from UM3for cooling radiators I recommend Sunon fans Gm0502PEV1
selected 1 means flow rate 1 strongly 3 weakly there is also a fan Sunon 1 cm thick but pay attention to 1 at the end.
And yes, I am very grateful to everyone who worked on the project MARK2 and DXU for the work done and the work.
- 2
-
-
-
Thanks to ALL the developers of the Cura 3.5 3.6 chicken works well (the extruder moves exactly on the tower)
I love it 😜 the print is very good 🤗
I want to ask this project DXU UM2 much better? (as viewed from the firmware side)
Should I switch to it? -
smartavionics
Dropbox win64.exe very very good ?
UltiMaker Cura 5.3 beta Released
in UltiMaker Cura
Posted
))) More precisely, I meant from the print area 200x200x200 remains 170x170x200