Jump to content
Ultimaker Community of 3D Printing Experts

kmanstudios

Ambassador
  • Content Count

    3,971
  • Joined

  • Last visited

  • Days Won

    117

Everything posted by kmanstudios

  1. Thanks for providing links for him. I could not think where I found it before.
  2. Or you can use the search tool at the top of the settings panel. Personally, I am all for the show all settings. It is a lot, but, can open a lot of tweaks as you learn.
  3. I am not sure where to find the info...I think @fbrc8-erin had a series of instructions concerning this. I tagged her so that she can hopefully gather the links for you.
  4. Doh!! 😖 That totally slipped past me.....
  5. Great work 🙂 I do not know the building, but I am now hearing The Who's '5:15' in me wee little noggin 🙂
  6. Did you do a really good hot and cold pull to make sure the CPE+ was fully out of the core?
  7. That is nice 🙂 I like the design. Yours or based off of a real building?
  8. I wash the prints with a degreasing dish soap and then thoroughly rinse to remove all traces of PVA as well as oils from the hands. There are times the print is soaked a lot in a vat of water with just a tiny bit of dish soap. But it will always get a final rinse and scrub. But binding is increased by spraying lightly and building up layers. And, then for some things like the critter above, at a certain point, I am really flooding the surface with paint. This is a basic tutorial for painting rattle cans over plastics (model building focused, but it applies t
  9. As an aside and back to chrome paints: If you are looking at the Spaz Stix line of paints (and they have some really cool paints 🙂 ), this vid demonstrates why I do not use their chrome based paints. And, yes, I have tried their chrome. Their Chrome is to be used on the inside of the transparent body. It works spectacularly well for what they are designed for. For the best Chrome review I have found for our applications (on top surface and not under transparent plastic), this is the link to @cloakfiend's review of chrome paints. I will be trying the Molotow Chrome
  10. When the model scales by that amount in the slicer, it means the scale is off. Where did you get the model? Or did you make the model itself? I am downloading it so that I can look at it later and let you know what I have found.
  11. Paints usually belong in an eco-system: Acrylics with acrylics and solvent based with solvent based. Also, making sure what will bind, will bind well. Also there are brand based ecosystems. Also, usually you can paint acrylics on a good primer base and then solvent based on top of that will usually work. This allow me to paint with an acrylic primer and then paint with any solvent based paint. In this print I used only the paints with the same base properties (as well as a brand based eco-system). These paints are part of the Dupli-Color anodized paint series. They prov
  12. OK, so I tried something different: Ornaments. My first ones were primed and painted with Krylon's original Chrome. The spiral ornament was left alone, but I shot some anodized paint over it.....meh..... So, I started to put washes of Pthalo Blue and Unicorn Milk. I built that up until it was a very deep, rich blue with pearlessence. The silvering parts were done with Semple's Holographic powder (Technicolor). But, shooting clear over the ball softened the out layers of paint and, well, let us just say that you should not drop them or it
  13. I concur. Having looked at many models here to help, this type of issue is as @Smithy said percentage wise. I would go as far as to say 100% 😆
  14. 😂 Me too.... If I am reading this right, the moire pattern is a result of the pixel resolution of the screen attempting to display the really tight lines in the preview. I imagine they go away once you zoom in. Now the print; are the lines matching up to the internal support structure? They remind me of leaf veins. Seams would not do that. Seams make straight lines.
  15. I stopped using priming towers after about my first 8 months. If you are having issues with your PVA (and yeah, it is a pain to print with) you should evaluate your room humidity levels. That is the biggest issue when printing with PVA. And minimize retractions to say about 10 or 12.
  16. I did notice, That is why I was so surprised that the model was spot on for 3D printing. But I have no idea beyond the model itself. Basically, the rest is up to someone who is more technically adept than I.
  17. Nope 😆 'Tis not I. It has been there since at least Cura 2.something when I first got started. Just a difference in needs or wants. Anytime I do something that has to be accurate, I would never use it. But, I make mostly silly little things, so occasionally it helps. And, if I missed a joke, Sometimes, I just do not get them. Sorry if I did 🙂
  18. It is off by default. So, somebody experimented and forgot the setting was on. I have found it wise to change settings one at a time and check results in the sliced preview. That could save people from silly things happening. 😉 I say this as the guy that changes settings like mad all the time.
  19. Your model is fine, I ran a check on it and there are no errors there. Then I ran it through my Cura (4.4) setup for my S5. Came out perfectly with none of the artifacting you see in your sliced image. I would be inclined to think it may have to do with either the version (I have seen issues with 4.8) or the setup for the printer type you are using. Saving the file out as a project file (.3mf) will let people see it the same way you see it as it will bring the model, printer type and settings into anybody's Cura.
  20. I have used it several times in my prints if I have a tiny area that would look bad without a continuous surface to buttress it without supports.
  21. So, I wanted to test out the Black 2.0 and Black 3.0 from Stuart Simple. While I have not been able to get that 'void look' as it is shown, but I can say they are the blackest Paint I have experienced. Black 2.0 is a black matte, but Black 3.0 has a 'velvety type of appearance. This was primed with Black matte spray paint. The Black 2.0 was painted over the Bat Symbol and cape up to ears. When Dried, I put Black 3.0 on the neck, face and cowl. This is Black Primed and then Black 3.0 on top. You can see the difference between the two areas (Black 3.0 and just
×
×
  • Create New...