Hi Marco_TvM,
after i did the manual bed leveling i want to print soething and ofcourse the printer did the automalical Z offset again and it fail again. First the test with printcoare 2 looked okay but with printcore 1 it moved to the left backwrads corner and the print bed pushed the nozzel into the head and stopped. At the display was something like the difference between printcore 1 and 2 is to high. ER22. I switched of the automatical leveling and without that function i could print. But the problem is not really fixed. Any idea what it can be or which part i have to change?
Here the file which you asked for.
[{"active_material": {"GUID": "60636bb4-518f-42e7-8237-fe77b194ebe0", "guid": "60636bb4-518f-42e7-8237-fe77b194ebe0", "length_remaining": -1.0}, "feeder": {"acceleration": 3000.0, "jerk": 5.0, "max_speed": 45.0}, "hotend": {"id": "AA 0.4", "offset": {"state": "valid", "x": 0.0, "y": 0.0, "z": 0.0}, "serial": "30647c130000", "statistics": {"last_material_guid": "60636bb4-518f-42e7-8237-fe77b194ebe0", "material_extruded": 128780, "max_temperature_exposed": 236, "time_spent_hot": 1056720}, "temperature": {"current": 24.5, "target": 0.0}}}, {"active_material": {"GUID": "506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9", "guid": "506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9", "length_remaining": -1.0}, "feeder": {"acceleration": 3000.0, "jerk": 5.0, "max_speed": 45.0}, "hotend": {"id": "AA 0.4", "offset": {"state": "invalid", "x": 18.0, "y": 0.0, "z": 0.0}, "serial": "850573140000", "statistics": {"last_material_guid": "506c9f0d-e3aa-4bd4-b2d2-23e2425b1aa9", "material_extruded": 352240, "max_temperature_exposed": 276, "time_spent_hot": 1886520}, "temperature": {"current": 24.4, "target": 0.0}}}]
best regards
Manfred
Please let me know if you need more informations for anylising that issue. BTW till friday i'm on a buisness trip and i will not have access to the printer.