Jump to content

rvator

Dormant
  • Posts

    8
  • Joined

  • Last visited

Everything posted by rvator

  1. I am trying to set up the machine settings for my BigBox Dual in Cura 2.6.2. By default cura heats up both extruders although only one extruder is used. There is a tab for Extruder1 and Extruder2 in Machine settings but if I edit the start code in one of these tabs, it has no effect on the generated gcode. I would like to heat up both extruders to soften eventally oozed material on the unused extruder before bed leveling and switch off heating the unused extruder afterwards.[media=68749][/media] [media=68750][/media]
  2. I am trying to set up the machine settings for my BigBox Dual. By default cura heats up both extruders although only one extruder is used. There is a tab for Extruder1 and Extruder2 in Machine settings but if I edit the start code in one of these tabs, it has no effect on the generated gcode. I would like to heat up both extruders to soften eventally oozed material on the unused extruder before bed leveling and switch off heating the unusd extruder afterwards.
  3. I am trying to print 3DLabPrint P38 with 0.4mm Nozzle and 0.4mm Wall Thickness. At areas with less slope I get additional, more or less interupted lines (yellow lines in the image) This parts show thru the outer wall and disturbs the appearance of the outside. Is there a setting to avoid this?
  4. I also had the problem on my Dell Precision M6400 & Ati Fire Pro 7740. Updating the video driver to version 8.702.0.0 solved the problem!
  5. Thank you! .... and the line: M140 S{material_bed_temperature} to get rid of M190 S75 . BTW is there a placeholder for "first_layer_bed_temperature" in cura 2.5+ ? I can't find a comlete list of this placeholders.
  6. I prepared a custom start Gcode for my E3D BigBox in Cura 2.5.0 Beta. But after slicing there is an additional Gcode before my custom start Gcode. ;FLAVOR:RepRap ;TIME:4698 ;Filament used: 3.26804m ;Layer height: 0.2 ;Generated with Cura_SteamEngine 2.5.0-BETA M190 S75 M104 S215 I want to eliminate this 3 lines M109 S215 ; below is my custom start Gcode M140 S75 M104 T1 S120 M109 T0 S120 M109 T1 S120 M104 T1 S210 .... .... .... How can I eliminate above 3 lines of Gcode before my custom start Gcode? Kind Regards, Franz
  7. I have the same problem with cura 2.x (2.5 at the moment) on my DELL Precision M6400 Laptop. I can only rotate about the X-axis with the red circle.
  8. Hallo, in Cura 15.04.5 gab es die sehr praktische Möglichkeit Objekte mittels eines einzigen Befehls zu vervielfältigen. Die Objekte wurden dann auch sinnvoll auf dem Drucktisch verteilt. In Cura 2.x.x gibt es nur noch den Befehl dupliziere Objekt und auch die Plazierung ist anschließend meist nicht recht sinnvoll (oft neben dem Drucktisch). Wenn man eine große Anzahl von Objekten drucken möchte ist das äußerst lästig! Habe ich da irgendeine Möglichkeit übersehen? Viele Grüße, Franz
×
×
  • Create New...