sthacher

Well, I hit the end of the filament shortly after posting. So I should have the new rolls 24 hours from now so (same brand) I'm going to roll the dice. Build plate seems to be remaining at 80C an hour since pausing. I'll post results.

I have 5 hours left on a 40 print and my delivery of filament didn't show up today like it was supposed to. My question is How long can I realistically pause a print for on an Ulitimaker 3+? Printing with PET-G and going amazing hope I don't have to start this one over.

I just stops and shows this error of the LCD screen

Hmm, I apologize but I thought I posted this in the software troubleshooting section.

I'm having issues with a print that keeps failing a few hours into a ~26hr print. I sliced with cura 2.5 stable, the first attempt was sent over network to the UM3. I used a USB drive for the second attempt failed but in a different location. Printer Firmware : 3.6.90.20170411 Apr 22 22:39:52 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:39:52,545 INFO nfcPrinterHotendInfo PrintCore 1 extruded 10.155390000000011 mm in 19.106929625002522, remaining length = 15793.194245488805 mm, stat record usage duration: 62574.127667849054Apr 22 22:39:52 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:39:52,546 INFO nfcController Queueing tag for hotend 1, tag: , record: Apr 22 22:40:21 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:40:21,521 INFO nfcPrinterHotendInfo PrintCore 1 extruded 10.363679999999988 mm in 2.801614937990962, remaining length = 15782.830565488804 mm, stat record usage duration: 62574.127667849054Apr 22 22:40:21 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:40:21,527 INFO nfcController Queueing tag for hotend 1, tag: , record: Apr 22 22:41:04 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:41:04,225 INFO nfcPrinterHotendInfo PrintCore 1 extruded 10.027229999999975 mm in 36.13182920499821, remaining length = 15772.803335488807 mm, stat record usage duration: 62574.127667849054Apr 22 22:41:04 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:41:04,229 INFO nfcController Queueing tag for hotend 1, tag: , record: Apr 22 22:41:20 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:41:20,867 INFO nfcPrinterHotendInfo PrintCore 1 extruded 10.018940000000043 mm in 15.204076590001932, remaining length = 15762.784395488805 mm, stat record usage duration: 62574.127667849054Apr 22 22:41:20 ultimakersystem-ccbdd3000ccc python3.4[372]: 2017-04-22 22:41:20,868 INFO nfcController Queueing tag for hotend 1, tag: , record: Apr 22 22:41:23 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:23 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10469 callbacks suppressedApr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:29 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10476 callbacks suppressedApr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:34 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10475 callbacks suppressedApr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:39 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10475 callbacks suppressedApr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:44 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: INFO: rcu_sched self-detected stall on CPUApr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: 0-...: (1 GPs behind) idle=8ed/140000000000002/0 softirq=258686/258687 fqs=1000Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: (t=2100 jiffies g=65597 c=65596 q=6)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: Task dump for CPU 0:Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: python3.4 R running task 0 365 1 0x00000002Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (unwind_backtrace) from [] (show_stack+0xb/0xc)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (show_stack) from [] (rcu_dump_cpu_stacks+0x5b/0x80)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (rcu_dump_cpu_stacks) from [] (rcu_check_callbacks+0x56d/0x6b8)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (rcu_check_callbacks) from [] (update_process_times+0x23/0x48)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (update_process_times) from [] (tick_sched_timer+0x31/0x5c)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (tick_sched_timer) from [] (__hrtimer_run_queues+0xc3/0x114)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (__hrtimer_run_queues) from [] (hrtimer_interrupt+0x87/0x180)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (hrtimer_interrupt) from [] (arch_timer_handler_phys+0x1f/0x24)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (arch_timer_handler_phys) from [] (handle_percpu_devid_irq+0x47/0xd4)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (handle_percpu_devid_irq) from [] (generic_handle_irq+0x17/0x20)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (generic_handle_irq) from [] (__handle_domain_irq+0x3f/0x80)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (__handle_domain_irq) from [] (gic_handle_irq+0x3b/0x70)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: [] (gic_handle_irq) from [] (__irq_svc+0x65/0x94)Apr 22 22:41:45 ultimakersystem-ccbdd3000ccc kernel: Exception stack(0xe72dde80 to 0xe72ddec8)Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: dfa0: 00000000 00000001 00318f98 00000000Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: dfc0: 00318848 00000000 a24ff930 003dd468 a24f5298 a24f529c 0000000b 002b0cd8Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: dfe0: 002b02d8 a24f5218 00126997 001269a0 600f0030 ffffffffApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 9928 callbacks suppressedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10475 callbacks suppressedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10475 callbacks suppressedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10475 callbacks suppressedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250_interrupt: 10476 callbacks suppressedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc kernel: serial8250: too much work for irq48Apr 22 22:45:39 ultimakersystem-ccbdd3000ccc systemd[1]: systemd-journald.service watchdog timeout (limit 1min)!Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd-journal[114]: Journal stoppedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd-journal[11875]: Permanent journal is using 59.8M (max allowed 47.8M, trying to leave 71.7M free of 59.1M available → current limit 59.8M).Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd-journald[114]: Received SIGTERM from PID 1 (systemd).Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Unit systemd-journald.service entered failed state.Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: systemd-journald.service has no holdoff time, scheduling restart.Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Stopping Journal Service...Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Starting Journal Service...Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Started Journal Service.Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd-journal[11875]: Journal startedApr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Starting Trigger Flushing of Journal to Persistent Storage...Apr 22 22:46:24 ultimakersystem-ccbdd3000ccc systemd[1]: Started Trigger Flushing of Journal to Persistent Storage.

I seem to be having a lot issues with the Ulitmaker 3 extended right out of the box. 2 of 3 nozzles were clogged on arrival one AA core and one BB core. So PVA wouldn't extrude at all right out of the box...looked like it had been used with black PLA or something. Active leveling seems to fail almost every other time. (Yes I have lowered the bed using the thumb screws, also have cleaned the nozzle tips as well...no I don't want to manually level the bed on my 5,000 dollar 3d printer that has auto leveling) When I do manage to get something to start printing it fails because the ultimaker spools of filament seem to unwind themselves after about 5-6 hours of printing...this in turn causes a the spool to get tangled and boom another failed print....... For something that I paid just under 5K for, sure doesn't work well at all. Are there any solutions to these problems before I start working with my reseller to take this thing back.