Jump to content

CharlieDent

Dormant
  • Posts

    6
  • Joined

  • Last visited

3D Print posted by CharlieDent

  1. Multimaker 3 printing very thin 1st layer. Problem in part of the initial print

    Hi, I am a new user to 3D printing but I have had a reasonable amount of experience with CAD drawing. I am using Sketchup 7 Pro at the moment.
    I created my own designed 2 sided thin poker chip with a round recess in the middle of it so I can place a round magnet in the centre. I can then attach it to a metal object with a recessed magnet inside the chip.
    My problem is, that the first print layer prints very well in CURA 2.4, considering I set it to 0.02mm Layer Height and Top/Bottom Thickness 0.02. But the recessed hole does not print even though the recessed hole doesn't start until the print level is at 0.24mm from the base.
    I am printing with 2 colours Black PLA and RED PLA with a 0.4 Print head.
    The rest of the model prints fine even with the started 0.02 thin layer.
    FILES and images are here:
    Please Help if you can. :-)

    717 downloads

       (0 reviews)

    0 comments

    Updated

  2. Red and Black Poker chip

    Red and Black Poker chip

    724 downloads

       (0 reviews)

    0 comments

    Submitted

×
×
  • Create New...