Shayde

Kannst du einmal genau erklären wie die Anti Overhang Mesh Funktion funktioniert? Ich setzte jeweils ein Modell an die Stelle an der der Support bei einem anderen Modell entfernt werden soll und aktiviere unter Per Model Settings die Anti Overhang Mesh Funktion. Das ändert aber nichts an dem Support, welches das größere Modell schützt. Hat da einer Tipps? Gruß und Danke

Hey Jeremy, did you get the Electrifi filament working now anywhere near the resistance they said it should have? Thanks!

Hi, thanks for the quick answer. Turned out it works, but only for bigger prints and a pause hight higher than 3 mm.

Hello everybody, I tried to use the 'pause at height' plugin on my Ultimaker 3 (cura 2.31 and 2.4), but I can't get it to work. The printer just doesn't stop at all. Thank you all for your help!

Ufortunately it doesn't work on my UM3 either. It adds following lines to the Gcode, but nothing happens. Would be great if somebody knew what to do. Thanks in advance! ;POSTPROCESSED ;TYPE:CUSTOM ;added code by post processing ;script: PauseAtHeight.py ;current z: 4.000000 M83 G1 E-4.000000 F6000 G1 Z5.000000 F300 G1 X190.000000 Y190.000000 F9000 G1 Z15 F300 M84 E0 M0 ;Do the actual pause G1 E4.000000 F6000 G1 E-4.000000 F6000 G1 Z5.000000 F300 G1 X0.000000 Y0.000000 F9000 G1 E4.000000 F6000 G1 F9000 M82 G92 E-1.000000 ;Generated with Cura_SteamEngine 2.3.1

Hey Labern, Quick answer, great, just tried it out and it worked nicely. Thank you very much for your help!

Hello everybody, I am more or less new to the 3D printing world. I would like to know if there is any chance to determine where Cura puts PVA support on my Ultimaker 3. Background is, I want to have a certain section printed without support, but the rest of the modell should be printed with support. Additionally, if there is no solution in Cura, which software could I use instead? Thanks a lot for your help!