Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

  • Days Won


Everything posted by Gigi

  1. Lema Green Cargo scale H0 (1:87) First attempt. UM3 Latest firmware, latest Cura Tough PLA 0,25 AA core (default profile) except support, changed to 10%. I think 8% will be better
  2. 2 AA Printcore with the same filament for printing an object. Left can use maximum left side and right can use maximum right side. But is possible that one can continue a line from the other one ? Is there any slicer ability to analize something like that ?
  3. Latest Cura latest firmware, no problem so far.
  4. Anyone have tried this combination ? It could be possible or i will destroy the printhead ?
  5. A big question for UM team. IF this update have so many problems , why did you release it ?
  6. In my point of view next step for UM3 are the feeders. I have already made some test at 20 microns layer some time ago, and i was told by the Ultimaker team that i will stress too much the feeders. So that will be the next logical step. Maybe.... Ruby Print core + New Feeders. PS. Maybe stepper with higher precision.
  7. Or maybe to take serious this forum. Or even to explain how to solve the problems after upgrade.
  8. UM3. Advice. Reset Cura Connect from printer. No more problems detecting printer from Cura (4.0). LAN connection.
  9. UM3. Cura 4, firmware 5.2 on printer. No problem, except IP address added manually on Cura. By the way it seems to me that stepper motors sound different , it think they run smoothly. Or is just an imagination ?
  10. Not tomorrow, but maybe in the future it will be available ?
  11. The real one. Sulzer origin, DA-060
  12. Zip file is solidworks part. Stl are profiles for 1mm plexiglass Part1.zip 1.STL 2.STL 3.STL 4.STL bara.STL colt DR.STL colt ST.STL ext feder.STL jos DR.STL jos feder.STL jos st.STL suport(baza DR).STL suport(baza ST).STL suport(baza).STL suport.STL sus DR.STL sus feder.STL sus ST.STL
  13. It was about rolling stock. G scale locomotive in progress. Last picture , bogie frame.
  14. There is a fourth answer : Hobby but not for fun. Railroad model building (for me) mdelling in general. Functional models. But not for sale.
  15. Build volume error. I can see it only AFTER i send job to printer. Why ? Why is the error not seen while slicing ? It is about raft for PC ultimaker. UM3 CURA 3.3.1
  16. First step was 0.8 AA and 0.25 AA cores. FDM printers will always be superior to SLA printers because of hard materials. I don't think will be an SLA that will print with carbon fiber, I think now you understand my point of vue. By the way, before S5 came out, i did say that the XY axle should be longer to use all the buid plate no matter what combinaition of cores you choose.
  17. I think is time to speak about AA cores for hard materials (abrasive ones)
  18. What is the real resolution improvement S5 versus UM3 ?
  19. From what i see it will use the entire build plate no matter what combination of nozzle and material you choose ? (i did recommended that)
  • Create New...