Gigi

Update firmware on printer. Last stable version of Cura. I am printing now with CPE+ (Ultimaker transparent) , 0.6 profile on Cura, an coach at HO scale (1:87). As soon as i finish i will upload photos. PS. My bed is at 109 degree Celsius, no door.

https://ultimaker.com/en/community/39568-printing-large-parts-with-nylon-and-pva?page=1&sort=#reply-179522

1. Feeder 1.75 mm 2. Bowden tube for 1.75 mm 3. AA Core with Ruby nozzle build in for 1.75mm

Credit card 0.8mm CD 1.1mm UM card 0.2 mm

The best way, is to be able to set the static IP, the same way you do for a computer. I don't know if the firmware is capable to do so. But only if you want to. For example my UM3 had choose 192.168.1.6 (ok for me)

https://ultimaker.com/en/community/prints/31844-baby-groot

https://ultimaker.com/en/stories/18361-using-ultimaker-3d-printers-for-manufacturing-at-siemens "To do so they found a specialized foundry based in Sydney, who take the component 3D printed in PLA and place it in a wax form. This form is dipped in a ceramic slurry and left to harden. The PLA is perfect for the next step, as during the firing stage the PLA is completely burnt off. The result is a cavity mold that they can directly cast steel into."

https://ultimaker.com/en/community/39568-printing-large-parts-with-nylon-and-pva#reply-177448

Anyone tried this filament ? For ultimaker possible use they have 2.9mm filament. And is a problem 2.85 - 2.90 ?

I would have to change the spring ? Bought my UM3 on 26 november 2016

Is about UM3. Thanks

3 spring of the bed, they're the same ? I had to disassembly the aluminium plate because it was a lot of dirt beneath .

https://ultimaker.com/en/community/37577-printing-from-polycarbonate https://ultimaker.com/en/community/35928-can-the-um3-print-polycarbonate Bed adhesion : glue stick from kit, and a wet paper towel to spread it. Support: Raft is mandatory. Bed temp: 107 C (from Cura Polycarbonate profile) I have printed without door. If you have it is better. Also in Cura 2.5 is a button to preheat the bed before start printing.

First attempt

-removed second video link-

Ultimaker front cover (possible door) Can you see it ? Very hard to see. Ok. Try to put in an A3 laminator an pouch without paper. Any complicated problem has always a simple solution.

Just a possible model

https://ultimaker.com/en/community/37577-printing-from-polycarbonate?page=1&sort=#reply-178324

Is better. Cura 2.5 Recommended profile,Normal quality (0.1mm), selected White PC (Ultimaker) Not perfect, but only diamonds are perfect.

You think PVA is better than HIPS for support ?

Possible in the future ?

Already did that