Jump to content
Ultimaker Community of 3D Printing Experts

astrosam

Member
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

3 Neutral

Personal Information

  1. I wonder why I would be running almost half your usage. Did you have anything loaded? Extra Plugins? I have a model loaded with layer view active, and LAN printer connection. That may be the reason... but I don't find it abnormal, today we have dual core / 16 GB memory rigs, so no pb...
  2. Mine is 684 MB... 12% CPU consumption. That's heavy but still seems normal
  3. Hello, I've just seen the release and it looks good. I see you took into account our feedback. Thanks, great job !! Let's fire a print and see how it goes
  4. Hello again, Another small issue that I have faced since the latest beta 2 I think. The connection between the printer and Cura is not always consistent. If I leave the printer being monitored in Cura, after a while the temperatures and time are sort of "frozen", and I cannot submit a new job to the printer. Restarting Cura solves the issue so no big deal. I also can see that from time to time, I need to authorize cura again to connect to the printer. That smells like some network confirmation change (due to the DHCP maybe ??). As a reminder, I'm using my UM3 wired (not wifi). No big k
  5. Hello, Another little item that I noticed in 2.5 beta : the layer view for black PLA gives a continuous black view (we can't see the layers at all because it is all black...). This doesn't occur for other materials such as nylon which show a dark grey. A little screenshot to illustrate (both black nylon and black PLA are loaded here) This is not preventing any print, but is an issue to have a closer view on the layers for multiple colour prints. So if you could improve this for the release that would be good Thanks
  6. Tested this evening with latest BETA 2 and I can confirm that both my PVA layer issue and head switching issue are gone. Many thanks for your help on this. I can continue using 2.5
  7. Hello, I checked and my version is dated of 3rd of April. The latest setup is dated 6th of April. So I reinstalled it and I'll make some more testing tonight (as well as print through USB) and let you know.... Thanks !!!
  8. Hi again, Thanks for the replies. Yes I'm printing over the network, however my printer is wired, not using wifi... and I also went to BETA 2 this week and still have the issues. However I have Cura 2.4 and 2.5 BETA2 installed on the same machine. Could this explain why I still have the issue ?
  9. Hello, Another weird thing I spotted with 2.5 is about dual color/material extrusion (no PVA). from time to time with a 2.5 originated print, the printcore switch sequence seems to be "missing" and I had a couple of layers where the wrong core is active, and pouring material just next to the intended area (because the sequence is running as if the other core was extruding). It happens for one layer, then the next material/layer prints normallly (in fact the printer doesn't attempt to switch back to the right core and just goes for the next material/layer, which is then printed consistently).
  10. Hello, Something that may be interesting to notice : I'm currently testing some dual color PLA prints, and I don't have the issue at all with PLA. It seems to occur only with PVA. Since flow control is not exactly the same for PVA and material "glues" more to the print head, that may deserve a special treatement in the slicing / printer init ?
  11. Yes of course, the layer view is correct and continues. I'd say that the flow doesn't seem to stop abruptly, there are PVA shards over the last "good" layer. But still it really seems to happen at the same height for every print...
  12. Hello, I've been facing an issue on my UM3 with dual extrusion print with PLA support which is related IMHO to Cura 2.5, so I'm posting it here (if this is not the right place, then sorry and I'll go for a separate topic). I've been using Cura 2.4 successfully with the UM3, then I switched to Cura 2.5 last week for testing purposes. I ended up using it daily because I love the new features... After a set of single extrusion samples which went fine, I tried a dual extrusion print with PLA/PVA Now the issue : the print starts normally, but after around 10 to 15 layers, the PVA flow seems t
  13. Hi again, We're not the only ones to have the issue with priming material. https://ultimaker.com/en/community/40388-um3-cura-24-nozzle-moves-away-then-back-into-initial-prime-extrude It would really help to have something to raise a little bit more the print head when priming. Many thanks for reading
  14. Hi, I just moved to Cura 2.5 and still the same issue for me (exactly what happens in the video). So I also end up waiting for the print to start, and "catch" the prime blob to prevent it to be dragged over the print area. Ultimaker team, you need to do something to help us
  15. Hello, I'm also playing with version 2.5. I have had an issue that is reported in this topic : https://ultimaker.com/en/community/40076-purge-of-material-at-start SandervG suggested this may be addressed in 2.5. Could you tell more about this ? I still need to remove the "priming" blob of PVA when the print starts, or it sticks to the nozzle (because it doesn't go high enough) and then is carried out to the print area :( Many thanks
×
×
  • Create New...