Roffe

Many thanks gr5. Problem partly but not entirely solved, unfortunately. I found that for some reason, Cura 4.4.0 had changed printhead 2 to AA 04 (PVA was selected). When I changed back to BB 04, I can see three profiles - Fine, Normal and Fast, regardless if I choose Tough PLA "generic" or "Ultimaker". When I try PLA for printhead 1, I can also see the "Extra fine" in addition to the others, "Fine, Normal and Fast". No other profiles can be seen. During installation of 4.4.0, I chose to keep my profiles. If that is the problem - can I erase all old profiles in 4.4.0? (In Preferences/Profiles I can see Extra Fine, Fine Normal, Fast under Global settings. Under Extruder 1 and Extruder 2, no profiles are found).

Hi, Everything works fine with Cura 3.6.0. Now, I just installed Cura 4.4.0 as I was interested in the Profiles, first and foremost the Engineering profile. I use Ultimaker filaments, black tough PLA and normal PVA, but it is not located at the back of my Ultimaker 3E, but in a Polybox. Unfortunately, Cura 4.4.0 says "profile not supported". I suspect Cura require that the printer recognize the filament at its back. What to do?