Jump to content

Skangster

Dormant
  • Posts

    27
  • Joined

  • Last visited

Everything posted by Skangster

  1. 0.4mm nozzle. The feedrate i haven't messed around with. I will check. Thanks for the tips.
  2. Ultimaker 2+,pla and normal stock settings. This "pattern" gets worse rhe higher the print.
  3. Do i have a clog somewhere or what is this? I played around with wood fillament yesterday and i had trouble extruding it. Maybe that clogged something?
  4. Bingo! Thanx guys. When i pulled the feeder apart i put the tension screw back wrong (came up from the case). Shhhhhh don't tell anyone...
  5. Wierd now it seems to work again, havent touch it...
  6. Yes once. Some fillament got chewed up inside. And yes i got everything back together. Even the spring.
  7. Oh yeah. Stock feeder. see picture. How do i know should i use the setting i have now or the middle. Read on here that there was some difference between machines made before a spesific date.
  8. Checked the tension yesterday, that seems good. Oh my... I think it was the fillament all the time. I changed color and it seems to be working now... Innofill3d green. Changed it to gold (same brand). How the hell is that possible?! Ps. Thanx again for the help and patience.
  9. Looking good. Daaamn this is frustrating... Now my fanshield is scraping on the left side... Time to change hobby? Updated the picture. Sorry Another casulty...
  10. Looking good. Daaamn this is frustrating... Now my fanshield is scraping on the left side... Time to change hobby? Updated the picture. Sorry
  11. Looking good. Daaamn this is frustrating... Now my fanshield is scraping on the left side... Time to change hobby?
  12. Yeah i did the bed leveling (that seems to be ok now) i checked the settings. The speed was 50 on fast print if i rember correctly,that was one thing you asked. The fillament seems to feed normally. Nozzle temperature atm is 210c,buildplate is 59c. Trying out a Benchy again...
  13. Ok now we are talking! Got rid of the tape. I haven't noticed until now that the tape was a big problem for good prints. Until now i had just printed smaller stuff that apparently was held in place better than big surfaced things (like the bed leveling testprint). Thanx for the advice. Now my son will finally have his robot... in 8 hours Still getting this bullcrap... Bedlevel ok. But still prints look like this
  14. Ok now we are talking! Got rid of the tape. I haven't noticed until now that the tape was a big problem for good prints. Until now i had just printed smaller stuff that apparently was held in place better than big surfaced things (like the bed leveling testprint). Thanx for the advice. Now my son will finally have his robot... in 8 hours Still getting this bullcrap...
  15. Ok now we are talking! Got rid of the tape. I haven't noticed until now that the tape was a big problem for good prints. Until now i had just printed smaller stuff that apparently was held in place better than big surfaced things (like the bed leveling testprint). Thanx for the advice. Now my son will finally have his robot... in 8 hours
  16. Any idea why this is happening? I'm getting frustrated... Trying to get this done for my son: https://www.thingiverse.com/thing:2316970 Instead i get this or a bigger mess if i leave it for the night (it says 8 hours). Here is a poor Benchy that also has this problem.... Any help appriciated.
×
×
  • Create New...