Edfablabboz
Member-
Posts
21 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by Edfablabboz
-
Iam printing with 2,85mm filament
-
Hello, I have a Ultimaker 2+ and iam trying too print with a 0,25 nozzle but every time it become's clogged. In Cura i pick the settings for a 0,25mm nozzle. My printer is runnig with 0,4mm filament. Is this the problem why it keeps clogging? Greetings, Ed
-
Ok, thanks for the feedback.
-
Hello, I have a UM2+ and a UM2Go and i'am using Cura 3.1. now. I'am wondering if it is posible too change color by adjusting and chaging the G-code. The "pause" function does work but when i try the "change color" function it does'nt.
-
hallo Jan, Inderdaad een zeer duidelijke uitleg van alles. Bedankt voor de tip. groeten Ed
-
hallo, Kan iemand mij vertellen welke settings ik het beste kan gebruiken voor PETG op mijn Ultimaker 2+? met vriendelijke groet, Ed
-
How to replace a belt on Ultimaker 2?
Edfablabboz replied to eduardas-afanasjevas's topic in UltiMaker 3D printers
Thanks for the feedback. I know that overall i can use the UM2 assembly manual for the UM 2 go. The main difference is the measure and possition of the X/Y sacer bushes. Therefore i liked too know where, and in what position the spacer bushes are in the UM 2 go greetings Ed Hi, Ed, the only difference for the 2 Go vs. the 2 is that your front most spacers on the 2Go are 3mm wide, whereas on the UM2 they're 5mm wide. The large spacer is still 25mm and the medium ones are still 10mm. Make sure everything is tight against the walls. Thanks for the info ! -
How to replace a belt on Ultimaker 2?
Edfablabboz replied to eduardas-afanasjevas's topic in UltiMaker 3D printers
Thanks for the feedback. I know that overall i can use the UM2 assembly manual for the UM 2 go. The main difference is the measure and possition of the X/Y sacer bushes. Therefore i liked too know where, and in what position the spacer bushes are in the UM 2 go greetings Ed -
How to replace a belt on Ultimaker 2?
Edfablabboz replied to eduardas-afanasjevas's topic in UltiMaker 3D printers
Hi illuminari, i saw youre replay here. Do you now if there is also a assembly manual for the UM 2 go? -
Ultimaker 2 Frame :)
Edfablabboz replied to minivipers's topic in Third party products & modifications
ok thnkss -
Afaik that's the esteps of the um2+ Check bowden, everything is in place right or check the feeder tension indicator is in the middle. It should work. Checkt it all and everyting was ok. Uploaded the firmware like discreibt on the builder from Amadee. E steps are set on +569.0 and then the extrusion is ok
-
Ultimaker 2 Frame :)
Edfablabboz replied to minivipers's topic in Third party products & modifications
I adjusted the files for cnc-ing and added 5 cm in z. Can share if you want but only in a few weeks as I'm on holiday atm. You do realize that you can build a full size um2 for about the same cost? I I wondered why you added 5cm inn the Z? Is that a necesary adjustment? -
Zero gravity direct drive extruder
Edfablabboz replied to gudo's topic in Third party products & modifications
Thanks for the info !! -
Zero gravity direct drive extruder
Edfablabboz replied to gudo's topic in Third party products & modifications
Hi Gudo, Looks great !! Do you only work with direct drive now or do you sometimes switch between the 2 systems? greetings Ed -
Ultimaker 2 Frame :)
Edfablabboz replied to minivipers's topic in Third party products & modifications
I know but i want too used it for demonstrations and educations so the size off the printer is more handy and easyer too take with me. -
Ultimaker 2 Frame :)
Edfablabboz replied to minivipers's topic in Third party products & modifications
Thanks !! -
Ultimaker 2 Frame :)
Edfablabboz replied to minivipers's topic in Third party products & modifications
hi, I want too build my own ultimaker 2 go. Does anyone have the step files or know where i can find and download them? greetings Ed -
The real question is: "why would you want to do that?" I have both (an UMO and an UMO+) and I don't see any advantage of having this 2.1.x board. The old one is rock solid; no SMD : so you can easily fix any problem; change drivers, ... And the new one is really expensive in comparision. For a real upgrade I would rather buy a Duet3D... Hi amadee I allready bought the board. Maybe in the future i will do the "duet3D" upgrade. thanks anymay for youre replah greetings, Ed
-
Hi, I just saw your PM, will answer here, I been very very very busy lately so I write much less. To fit the um2 2.1.4 board I just did mark the holes with a pen and drilled the bottom. The most important part is to check the length of the cables so everything reach the board (specially the pt100 and 5v fan are shorter) The DXF bottom of the umo+ could work as guide, but since umo and umo+ are different it won't be much help. For the Sidepanel, to plug the PSU and access the power on/off I just used the Left umo+ panel to see how big where the holes and with a hacksaw I did cut the wood. The wood is very easy to drill/cut (use gloves and any other protective tool etc etc). The umo+ DXF are on the github are HORRIBLY, and is a mess to find the right panels because they also list the UMO, not umo+ ones. To get the right ones check this folder: https://github.com/Ultimaker/Ultimaker-Original-Plus/tree/master/laser%20files%20Ultimaker%20Original%20%2B Btw if your 2.1.4 board isn't from 'official' sources, remember to print this Spacers, china cloned boards don't have it and you need to have some distance from the wood frame to the board. Or buy some Nylon Spacers (more temp resistance) https://www.youmagine.com/designs/printed-spacers-for-ultimaker-2-pcb Also about your question about Fan cooling the board, no the 2.1.4 doesn't need a fan. But In my experience on past summers, I had to add heatsink to the stepper chips to avoid problems when the room gets at 30C. Since then I never had a problem with them and also my board doesn't show the typical 'brown' discoloration that is typical on the um2 boards over time. Hi neotko, Thks for the great feedback and my compliments for the acurate desribsions from the upgrade. greetings,Ed
-
Hello neotko, I have a question. I have a UMO and i want too replace the main bord for a newer type (V2.1.4). Because of the different positions of the switch and plugins i wanted too replace the right and bottom panels also. Do you have the right DXF files so i can laser/engrave the parts and replace them? greetings Ed