Jump to content

6maker

Member
  • Content Count

    39
  • Joined

  • Last visited

Everything posted by 6maker

  1. Very Nice printing!! You finish to convince me to try to print this model!😁 Thank you too for the calibration model, it's very helpful! https://www.thingiverse.com/thing:3318554
  2. I'm trying the beta 4.0 and i would like to print with PLA and PVA. Could you give some tips to manage the material type of the center of the cylindrical tower? I would like to change this center of PVA material to have a better grip between the brim and the second layer of PVA. Do you think that is possible to ask to add this option?
  3. Finally it works! Ok, not yet perfectly but it works ...
  4. It's very funny i'm trying to find a solution during many day and just after to send this topic i found the right parameter to manage it. Before that this parameter "Support Z distance " in the Extruder 1 was at 0.05mm
  5. Hi , Do you have somes tips for managing the gap between the PLA part and the PVA support in Cura 3.0.4. Thank you for you help
  6. 6maker

    PVA Question

    When we wanted to upgrade our ultimaker 2 and (now our 2Go) we had to find a solution to control our roll. I don't know if our solution could help but we designed a Bobinet in order have a better management of the rolls. In the dual upgrade, the bad point of this solution is to open the plastic cover of the motherbord in order to connect the new PVA extruder as you can see on picture. The wire is constraint under the cylinder and after the hole there is a metalic axe in this hole to protect the PMMA. Since this addition we have no more roll issue.
  7. Great! So could you send me your contact to this email: team@6maker.org delighted to work with you ?
  8. hi, This is a automated solution. You can find a little video with this link: https://www.thingiverse.com/thing:2608925 You can see my prints with Scaffold and poly plus PLA.
  9. Hello, I designed a prototype in order to upgrade the ultimaker 2 and 2go. the Dual-Balance You can find informations about it onb www.6maker.com My solution is not perfect but it works well! At the moment, I'm trying to find people to test my design and to tell me what is good or what is perfectible ? If you wish, we can work together to upgrade your printer? Have a good day. 6Maker
  10. Hi, I'm happy to hear this ? . Have a good day! Team 6 Maker
  11. Okay. maybe the other idea is to measure directly on your board (if you have not already done it ? A+
  12. Hi, Is it possible to control the impedance of the sensor? On my ultimaker2 i have 110 Ohm for the sensor.
  13. Hi, if you are interested about the management of your wire you can follow us in our first event in Waco texas: https://www.facebook.com/events/2033912206859276/ Come share your experience with us! It is together that we ferosn great thing!
  14. until
    The idea behind Bobinet is to provide some help in protecting and managing your filament. The second solution that will be presented has the potential to give your older printer dual extrusion capabilities. Please come support this new technology from France! Light snacks will be provided! This is a free event! https://www.facebook.com/events/2033912206859276/
  15. Hello ahoeben and Rowiac, I think I have finished in a month or two a web page to explain my mechanism. I just finished some prototype for friends with two smaller 25 * 25 * 10mm wfan for cooling the printed part. I would like to find 7mm but it's not easy. For the moment my system is not perfect yet that's why I want to remain discreet about the mechanism because it can still change. But you will be the first to have all the details.
  16. Good evening, I had a very honorable result a few weeks ago with "scaffold". You can see below the detail of may last post: I just understood this "scaffold". When we do a simple manual extrusion test (disassembly of bowden with insertion and removal of the wire by hand) we understand that it retires very difficult and it is certainly this effort that gnawed the wire when of the retraction by extruding it. I also raised the temperature to 230 ° C to get a good result. Here is the piece in cura 2.7. Here are the settings for SCAFFOLD and Poly_Plus_PLA. And here is a link with other upcoming photos and details: https://ultimaker.com/en/community/prints/38361-the-scaffold-water-soluble-pva-wire-and-poly-plus-pla Thanks to those who helped me
  17. Hello Migo, I'm not a expert but i work on a new design in Dual Extrution the Dual Balance system. At the present time this system work well on a ultimaker 2 and there is some advantage: 1 No need to had other eletronics 2 No need to had other Power supply 3 using the same firmware of the ultimaker original Dual 4 The nozzle who is not active have a special Z level (-1.5mm) in order to protect the already printing things. You can find some test here : https://www.thingiverse.com/thing:2644923 Now i works to change the 12v fan with only 7 mm of thickness. I don't know the ultimaker original but as mentioned neotko you need to change some things. May be you can find some examples to upgrade your ultimaker original in dual Extruder mode.
  18. Thanks, maybe you can find some detail about a ultimaker upgrad kit who explain all the operation to change the header. this operation is the same if you want to had a second extruder on your machine with this link: After the principale think is to control the plastic wire in order to ovoide the ooze of each nozzle. And after, you will need to avoid to touch the first impression with the fisrt nozzle. to do this you can use un CURA 2.7 with one option to go down the table for the nozzle changment operation. And the last is the control of the temperature in the head. You need to cool down more the head, that why i had change the head cover to put 2 others fans. That why ultimaker3 change the Z position of the unused nozzle like my system Dual Balance.
  19. Hello Christian, i'm working on a prototype the Dual Balance and it's works on the ultimaker original and ultimaker 2, 2+ and 2go and it's possible to assembly this system on other printer who have a compatible board to control the second extruder. But this is a prototype and not a commercial solution. You can find some details about the things what i have succeeded to print it with SCAFFOLD water-soluble PVA Wire to folow this link: https://ultimaker.com/en/community/prints/38361-the-scraffold-water-soluble-pva-wire-and-poly-plus-pla About the firmware, you can modify it in order to declare the second extruder as "#define EXTRUDERS 1" to "#define EXTRUDERS 2" This line is in the "configuartion.h" file in the firmware source code: // This defines the number of extruders #ifndef EXTRUDERS #define EXTRUDERS 2 #endif You can find all the information about this marlin firmware to this web page http://marlinfw.org/docs/basics/introduction.html With some information about your printer, If you want, i can compile this firmware for you in order to have a dual extruder firmware on your ultimaker original. My prototype does not need to add other electronic cards or actuator to operate. I guess my prototype will be totally finished in 1 month, if you want and if you are favorable, I can send it to you for beta testing? I hope I have brought you some answers.
  20. Version 1.0

    312 downloads

    This is my first test with the new cover Dual Balance with the Poly Plus PLA and the RED ABS of Ultimaker 1623 to print a new bulbasaur in 0.15 mm per layer with my dual extruder system. You can find also the grand brother at this address: https://www.thingiverse.com/thing:2644923
  21. Comme je change souvent de bobine j'ai placĂ© une bobine de chaque cĂŽtĂ© de la machine et je pose les bobines Ă  la verticale. Elles se dĂ©roulent toute seule sans s’éloignĂ©e car le filament les retiens et Ă©vite qu'elles roulent n'importe oĂč.
  22. Version 1.0

    384 downloads

    You can find here my test with a water-soluble PVA Wire the SCAFFOLD and POLY PLUS PLA in dual material mode. After many tests and help with the community, i found this parameters to print the SCAFFOLD with 0.3mm nozzle and the cura 2.7 in 0.2mm per layer. I 'm using a special head "Dual_Balance" but you can also use this paramters with you dual printer with 0.3mm of nozzle. You can find below the picture with all the cura 2.7 parameters for the SCAFFOLD. You can find below the picture with all the cura 2.7 parameters for the white POLY PLUS PLA. You can find the 3d model with this link: https://www.thingiverse.com/thing:2608925 The only problem that has occurred is a layer that is detached from the tower caused by my setting on CURA to clean the nozzles. so to avoid!
  23. Bonsoir, Victoire !! j'ai un rĂ©sultat trĂšs honorable! Je viens de comprendre ce "scaffold". Lorsque l'on fait un simple test d’extrusion manuelle (dĂ©montage du bowden avec insertion et retrait du fil Ă  la main) on comprend qu'il ne se retire que trĂšs difficilement et c'est trĂšs certainement cette effort qui rongeait le fil lors de la rĂ©traction par l'extruder. J'ai Ă©galement augmentĂ© la tempĂ©rature Ă  230 °C pour obtenir un bon rĂ©sultat. Voici la piĂšce dans cura 2.7. Voici les rĂ©glages pour le SCAFFOLD et le Poly_Plus_PLA. Et voici un lien avec d'autres photos Ă  venir : https://ultimaker.com/en/community/prints/38361-the-scaffold-water-soluble-pva-wire-and-poly-plus-pla Merci pour votre aide!
  24. Oui c'est vrai. Mais j'ai juste dĂ©ballĂ© le filament neuf et aussitĂŽt lancĂ© une impression. C'est pour cela que je me suis dit que normalement l’humiditĂ© ne devrait pas jouer (si humiditĂ© il n'y avait pas avant dans le fil....) Je fait un test ce soir. je vous tiens informĂ©.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!