Jump to content
Ultimaker Community of 3D Printing Experts

ex-egll

Dormant
  • Content Count

    17
  • Joined

  • Last visited

Everything posted by ex-egll

  1. Thanks for the info, the world of .json files is like an unsolvable maze! Plodding through them now, I'll see how it goes. Again thanks for your help.
  2. Removing the M104 has no effect, at least on my machine. Could you point me to the location of the .json file that needs to be modified to to stop it from adding both start codes? Many thanks
  3. Hi, thanks for the response. I realise that I can create my own start code in Cura but Cura inserts its own start code prior to the the user defined one e.g. M190 S65 M104 S200 M109 S200 It was these I wanted to delete or be able to modify. Ok on heating the bed first, I hadn't thought about the oozing issue, although my question was more about why, for the nozzle heating does Cura use an M104 followed by an M109. Wouldn't just the M109 serve the same purpose?
  4. Sorry, another question from a noob if I may. Below is the portion of gcode produced ahead of the user defined stat code in a Cura 2.6 Beta gcode file.. ;FLAVOR:RepRap ;TIME:4385 ;Filament used: 1.60282m ;Layer height: 0.2 ;Generated with Cura_SteamEngine 2.6.0 M190 S65 M104 S200 M109 S200 Is it possible to change this code? Ideally I would like to change the temperature settings to: M104 S200 ;Start heating extruder M140 S65 ;Start heating bed M109 S200 ;Wait for extruder to reach temp before proceeding M190 S200 ;Wait for bed to reach temp before proceeding This way
×
×
  • Create New...