Jump to content
Ultimaker Community of 3D Printing Experts

bigmodels

Member
  • Content Count

    5
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by bigmodels

  1. Thanks for the comments, purely trial and error, just working out the best settings for the machine resolution and what details I am trying to capture.
  2. After some trial and error with sizes I think I have come up with what works best for me with building details on the UM3. Attached a couple photos of before and after to show the end result. For vertical extrusions out from the face of the building I use 0.6mm width due to my nozzle size, for internal thin cuts that indent into the model I use 0.4mm width and for horizontal indentations and extrusions I use a height of 0.2mm. Windows I usually cut in 0.5mm with a 0.6mm offset to show the window frames when possible and for the thin elements I extrude or cut in 0.2mm just to show t
  3. Version 1.0

    572 downloads

    First real test of a large print time, 36 hours using PLA/PVA support material. I come across alot of balconies and overhangs in my work so hoping the UM3 does all it is supposed to do. So far so good. Only issue is my prime tower keeps falling down. I used a brim which helped for a bit but then failed, thank goodness it didn't affect the final result.
  4. I am also running windows 10 with cura 2.6.2 installed and it will save to removable drive once and then if you want to do it again it will not recognize there is a removable drive available. Once you restart Cura it will again recognize the removable drive to save once. Any help would be appreciated.
×
×
  • Create New...