Jump to content
Ultimaker Community of 3D Printing Experts

DanielSun

Member
  • Content Count

    34
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by DanielSun

  1. Hi, I have to took a decision between 3D printing and cnc milling. Both are great hobbies but I have to choose one and don't have the time for all hobbies. So I decided to make cnc as my primary hobby (waf), if you know one from Germany who is interested in an UM2+ clone 1.75mm with the parts for dxu upgrade look here. https://www.ebay-kleinanzeigen.de/s-anzeige/achtung-selten-ultimaker-2-extended-clone-dxu-update-1-75mm/1038553019-249-8240?utm_source=sharesheet&utm_medium=social&utm_campaign=socialbuttons&utm_content=app_android Thanks and b
  2. Hi, you have to look for an agent wich orders for you. I make a lot with CNC's and buy all from one seller over Aliexpress and I asked him if he would order it for me and send it to me. But look for an agent service they will amount a few euro and will send it to you. Best wishes Daniel
  3. Hi, today I got my parts for the DXU update. Now I have to order a few parts like the bearings and than let it rock 🙂 I will post a few pictures when the update is build. Best wishes from Germany
  4. Hi fcassulo, the change is not only a change in the configuration.h. It's a lot more you have to change a lot of things. the biggest problem is to get it work without the second PT100. But it don't take long for the SW release. I have a working alpha Version and finishing the release Version where you can choose if you work with Cyclopse or with Y adapter to make the Filament Change und set the height of retract if you have an Y-Adapter but it takes a little bit, I'm milling a big project for my wife in the living room and for the "WAF" it's important to do th
  5. Hi, here is the video to the print. I'm near to release the first software on Github.
  6. Here also a detailed picture of the printquality. It's printhead with 0.15mm layer height
  7. The first real dual print is finished, I had 2 times a switching problem with the black colour. Tonight I will check why. Here a few pictures. I'm really happy. Now I will make print test's until end of next week and then go to vacation. Here I will write a how to and relaese it as beta here. Now a few pictures
  8. At the moment I´m making print test. For example I found an error in M140 code for the heated bed (I erased a line to much ?). For the moment the decision to change from Cyclops clone to um2 printhead was a great decision. Pro - No temperature problems like i had with cyclops clone - Cheaper like with cyclopse - If somebody will build this, he needs only a stepper-motor, an 2nd extruder and little bit of ptfe tube. If somebody make an y adapter, splitter or how ever its called, for 3 mm it should work with your actual setup and don´t have to change to 1.75
  9. After having a lot of trouble with the temperature of the Cyclops clone and for me personally the um2 printhead is a great printhead I give it a try. And after a little bit of Testing I can say it look like it works. Take a look to the video and good night
  10. Tonight I have to look for the actual mounted heater. At the moment it's mounted on one site so the 2 extrusion is good no dropping or anything and the side with the heater is to hot and the heat hears the filament in the tube
  11. At first I will start with 40w, I didn't found one with more watts. Do you know a German reseller that sell this?
  12. It was a very long step to show this but now I can show my first dual prints with 1 temp sensor and 1 heater. The printquality is not the best because the temperature is not stable or the difference is to big between both colours. The reason is that normally there have to be a 6*30mm heater but I only have a 6*16mm. But I think I will get the right heater soon. But here my first 2 videos:
  13. It seems that the firmware works. I was able to start without temp error in dual extrusion with only 1 tempsonsor ? There are two tempsonsor connect temp1 and the heated bed. If I have enough time, tomorrow I will start my first print.
  14. Hello, today I get my printhead. @ my homepage www.SeoGeo.de I beginned te build, but I will not talk about the clonebuild here. There a picture of the printhead and the frame of the new printer.
  15. Update for today: Advanced menu is finished and I think I found where I can deactivate the second temp sensor, but I have to wait for the hardware to test it. Move material for both extruders and heatup nozzle only for 1 heater.
  16. Hi, But I have order all parts for the printer new. I start fresh with 1.75 and have to buy new filament, but yes if it's possible to change modify the extruder it's also a possibility. And for me one possible aspect is I can test filament from friends they use all 1.75. The only what had to be changed is the steps for the extruder. And in German: "Danke für den Tipp, hätte ich vielleicht vorher schauen können ? Grüße aus BW"
  17. Hello together, after building a custom custom frame for an UM2 Link and make several test's with dual printing system's, I decided to make a test with an Cyclops extruder clone. At first I started with the firmware because i will use only 1 heater and only an resistor from the tempsensor of the second unused heater. What's done for the moment? - Printing: GCODE hotend changed with M104 and M109 changes every time the temperature of the hotend 0 independently of the temperature is set for E0 or E1. In the picture you can see that heater 1 is heating und steps o
  18. Hello together, Somebody knows how to change my account name? I can change the email but I don't found where I can change my name. Thanks
  19. Hello together, I'm playing a little bit with the firmware and make some test but I have problems with the SD card support with the simulation. Can somebody tell me what I have to do for test a print file. I made a models folder under c:/models, named my file like in the code, I changed the path in the code but nothing helps. Does somebody know what I have to do? Thanks Daniel
  20. Ja nicht ganz, habe mir diese Anleitung auch schon angesehen. Das was es auch einen Seite reingeht, geht es aus der anderen wieder raus. Interessant ist das es nur am Anfang passiert (solange der Boden gedruckt wird. Beim Drucken der Seitenwand passiert das nicht mehr.
  21. Hallo zusammen, Habe mir einen neuen UM2 Clone (nicht mein erster 3D Drucker) zusammengebaut. An sich drückt er super kann nicht nicht beschweren. Wenn ich kleine Ausdrucke mache in mitten des Druckbettes dann ist alles okay. Drücke ich was größeres z.B. ein Gehäuse dann zieht mir der Ausdruck in beide Achsen ein wenig zur Seite aber nur solange der Boden gedruckt wird. Bei den Seitenwänden läuft es gerade wie es soll. Die Achsen laufen soweit leichtgängig, die Riemen sind gespannt (alle 6), der Strom der Stepper hochgesetzt um ggf Schrittverluste bei leichter Schwergängigkeit
  22. Auch auf die Gefahr hin es heisst ich hätte zu viel Zeit :-) Das Mark 2 Update ist fast durch. Wie immer ein paar Bilder.
  23. Hi Gerd, genau genommen bin ich aktuell Strohwitwer und hab dadurch gerade ein wenig mehr Zeit abends. Wenn aber das Gehäuse mal steht geschieht der Einbau der Teile in 3-4 Stunden. Ich musste ein paar Kabel verlängern und das 2. Hotend ist noch nicht angeschlossen aber sonst ist alles verbaut und läuft. Das Gehäuse ist komplett aus HPL gemacht, ich mag dieses Material und arbeite gern damit. Irgendwann hatte ich mal gelesen (finde es aber nicht mehr) das der Kunstoffkern bei geschlossenen Druckern (mit Deckel und Tür) gern mal weich werden ist, an sich aber eigentlich egal, da ist ja jet
  24. So es ist soweit der Drucker druckt. Bilder von den Ausdrucken folgen. Nächste Schritte: Seitliche Türen und Front Tür Mark 2 Update Wenn Mark 2 fertig ist noch einen Deckel oben drauf. @Ultimaker Team Wo darf ich unter welchen Voraussetzungen die Pläne posten? Genug geschrieben hier ein paar Bilder:
×
×
  • Create New...