Jump to content

Xeraz

Dormant
  • Posts

    4
  • Joined

  • Last visited

Posts posted by Xeraz

  1. Thanks for you answers, alright

    Ok, makes sense, dont know why i didnt read the builder description properly, thanks for that

    + I dont know why we thought it would be that easy...... but yea, brings me to another question: why didnt someone else thought of installing that second extruder before?

    thanks for that link, i will try my best, what do you mean with "dual firmware", is there a link you could give me?

    Hello Hinz,

    Did you manage to have luck correcting your issue? I have pretty much the same setup.

  2. I actually have the same setup. UM2 with the + extrusion upgrade.  I also used the original to upgrade to dual extrusion.  I loaded the UltiCreatr firmware.  Thus far I have been able to get it to print the first layer without issue.  After the first layer the primary offsets on the y axis about 5mm toward the back, while the secondary nozzle does not.  The machine also decides to goto 0,0 to wipe the nozzle and hits the clip on the front left of the UM2.  I checked the gcode but could not see an issue in the commands.  I was hoping to be able to convert the hex firmware code back to readable to check/update the firmware, but alas it does not look possible.  I may have overlooked something.  Not sure how to attach the code to the post and the limit is 20000 characters. First Pic is the bottom of first layer. The second is the top of finished print. bottom_of_first_layer.thumb.jpg.561a2f55132e3ed04f98794103c89e47.jpgTop_of_finished_print.thumb.jpg.5520aac1280498d88cd645a80f301bf3.jpg

  3. Hello,

    I have completed a custom modification to my UM2 to have dual extruders. I am at the point now where I have updated the json files for the definitions and extruders. I am stuck at the point right now where I need to modify the .curaprofile to allow both extruders to be recognized. Unfortunately, while I can modify the text using notepadd++ to do this the saved file gives me an error when I try to import it into the profile manager. I am thinking that when I save may have the wrong file format or that I need to use a different editor. Any ideas?

    Regards,

    Adamdual2.thumb.jpg.ad7eb4c4d3172f676e38bc0d638b0082.jpg

    dual2.thumb.jpg.ad7eb4c4d3172f676e38bc0d638b0082.jpg

×
×
  • Create New...