Jump to content

Smokie

Dormant
  • Posts

    33
  • Joined

  • Last visited

Everything posted by Smokie

  1. In a viewer it looks okay Print starts okay layer 5 and following the extruder stops The movement cont After a few layers its clear that the extruder is not starting anymore Tried in more cura verions The fillament is grinded and clogged fore the pfte
  2. In a viewer it looks okay Print starts okay layer 5 and following the extruder stops The movement cont After a few layers its clear that the extruder is not starting anymore Tried in more cura verions
  3. https://www.dropbox.com/s/t6xazu3rh8msavc/reed%207.5%20new.stl?dl=0 hope this works wr Henk
  4. how to upload an STL file?
  5. thanks for the reply tried all versions of cura , best results with 16.0.1 came with the duplicator i3 firts results were okay after experimenting with cura the problem of stopping extruder after first layer occ see pictures wr Henk [/media]
  6. hello, raft and first layer with infill are good the following layer there isnot comming anny fillament out of the extruder design drawn in 123d , converted to stl and g code in cura(tried all versions) were to look fore the mistake? all help is welkom! wr Henk
  7. dank voor jullie reaktie, ik heb inderdaad de bij de printer geleverde versie 16.0.1 in gebruik dit is tot nu toe bij mij de best werkende krijg de instellingen niet goed werkend naar bv de 2.6.2 versie gr Henk
  8. heb software versie van cura 16.01 en dit werkt naar behoren zie deze niet in de lijst met versies ? de nieuwe versies 2.6.2 bv werken bij mij nog met erg veel problemen,zal wel met mijn onervarenheid met parameters instellen te maken hebben Gr Henk
×
×
  • Create New...