Hallo UM-Leute,
ich habe Problem mit meinem UM2. Sobald ich die Modell vom SD-Karte auswähle, macht er folgendes:
- Z-Plattform fährt runter, Endstop betätigt
- X/Y-Achsen fährt zum Endstops
- X-Achse fährt vor
- Nozzle und Bedtemperatur fangen an zu heizen
- Die Temperaturen wurden erreicht
- Z-Plattform fährt hoch
- Filament läuft aus dem Nozzle heraus
- Z-Plattform fährt runter, Endstop betätigt
- X/Y-Achsen fährt zum Endstops
- X-Achse fährt vor
- Filament läuft aus dem Nozzle heraus
Dann fängt UM2 an zu drucken. Woran liegt es? Hab im Cura 2.7 Start Gcode angeschaut. Wer findet den Fehler?!
G21 ;metric valuesG90 ;absolute positioningM82 ;set extruder to absolute modeM107 ;start with the fan offG28 Z0 ;move Z to bottom endstopsG28 X0 Y0 ;move X/Y to endstopsG1 X15 Y0 F4000 ;move X/Y to front of printerG92 E0 ;zero the extruded lengthG1 F200 E50 ;extrude 50 mm of feed stockG92 E0 ;zero the extruded length againG1 Z15.0 F9000 ;move the platform to 15mmG1 F9000M117 Printing...
Gruß DEAFBOY80