Hello Ultimaker community!
When I print the Ultimaker Robot with Octoprint, the hands gets messy.
Well, not only the hands. The lower parts of the arms are just random strings.
The same robot from the SD-card prints excellent. Every time.
The photo shows the difference. These examples are printed in ABS.
I have made an effort in ensuring that they are printed with the same settings, from Cura.
I have repeated this ca 10 times and changed only one factor each time.
The results are consistent and I dare to say it´s not random.
I run latest Octoprint on an RPi2 connected to my network by ethernet cable and to UM2+ by USB.
* I´ve used Cura 3.10 from Win10 and Mac
* I´ve used the UM2+ firmware from Cura 3.04 and Tinker V17.10.1
* Gcode flavor is set to Marlin but RepRap is also tested
* I´ve printed in PLA, ABS and XT
The results have been identical.
The start and stop gcode in Cura are altered slightly to output more material before print and to lower the plate after print.
This works.
I would really like to get this working because everything looks super slick and works like a charm - except the results. My plan is to add the 7" touchscreen to Octoprint/OctoPi once this is working.
Grateful for any help to make this awesome!
Best regards
/Carl-Henrik