Jump to content

DerM4209

Dormant
  • Content Count

    1
  • Joined

  • Last visited

Community Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Hi have you tried to set your temperature under Material? Default Printing Temperature Printing Temperature Printing Temperature Initial Layer Initial Printing Temperature Build Plate Temperature Build Plate Temperature Inital Layer Standby Temperature Some settings are not shown by default. I have tried for hours today to get my QIDI TECH 1 working but now it works both Single and Dual Extrusion with Cura 3.1.0. My Settings are: Start Code: M73 P0 ; Enable build progress G162 X Y F3000 ; Home XY maximum G161 Z F1200 ; Home Z minimum G92 Z-5 ; Set Z to -5 G1 Z0 ; Move Z to 0 G161 Z F100 ; Home Z slowly M132 X Y Z A B ; Recall home offsets M135 T0 ; Load right extruder offsets G1 X-110 Y-70 Z30 F9000 ; Move to wait position off table G130 X20 Y20 Z20 A20 B20 ; Lower stepper Vrefs while heating M126 S[fan_speed_pwm] ; Set fan speed M140 S[bed0_temperature] T0 ; Heat buildplate M134 T0 ; Stabilize bed temperature M104 S[extruder0_temperature] T0 ; Heat right extruder M104 S[extruder1_temperature] T1 ; Heat left extruder M133 T0 ; Stabilize right extruder temperature M133 T1 ; Stabilize left extruder temperature G130 X127 Y127 Z40 A127 B127 ; Default stepper Vrefs G92 A0 B0 ; Zero extruders G1 X100 Y-70 F9000 ; Move to front right corner of bed G1 Z0.3 F6000 ; Move down to purge G1 X-90 Y-70 E24 F2000 ; Extrude a line of filament across the front edge of the bed G1 X-100 Y-70 F180 ; Wait for ooze G1 X-110 Y-70 F5000 ; Fast wipe G1 Z0.5 F100 ; Lift G92 A0 B0 ; Zero extruders M135 T1 ; Load left extruder offsets G1 X-100 Y-68 F9000 ; Move to front left corner of bed G1 Z0.3 F6000 ; Move down to purge G1 X90 Y-68 E24 F2000 ; Extrude a line of filament across the front edge of the bed G1 X100 Y-68 F180 ; Wait for ooze G1 X110 Y-68 F5000 ; Fast wipe G1 Z1 F100 ; Lift G92 A0 B0 ; Zero extruders M73 P1 ; @body (notify GPX body has started) End Code: M73 P100 ; end build progress G1 Z150 F1000 ; send Z axis to bottom of machine M140 S0 T0 ; cool down HBP M104 S0 T0 ; cool down right extruder M104 S0 T1 ; cool down left extruder M127 ; stop blower fan G162 X Y F3000 ; home XY maximum M18 ; disable stepper M72 P1 ; play Ta-Da song I set Origin at center and Gcode flavor to RepRap in the Machine settings. I had some trouble with blobs and clogged nozzels at tool change because Cura handles Dual Extrusion Extruder values combined but Makerbot Clones / Sailfish firmware printers need seperate Extruder values. So I tried to use the Relative Extrusion setting under Special Modes which looks like its only working when Gcode flavor is set to RepRap. Then I have exported the .x3g file whit the x3g writer plugin and started printing successfully I hope I can help you or others who have the same problem. Sorry for my bad english I`m from Germany and that`s my first post.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!