Ich

Hi @fbrc8-erin thank you so much for your support. Great manual and hints. That's what i was searching for. best regards, ich

Hi all together, is there a manual available how to change x and/or y axis (for changing belts and pulleys) at a UM3/E? Nothing found so far. Thanks for your help, best regars, ich

Hi @SandervG thanks for your reply. Yes, there are a couple of devices connented to the Wifi: two cell phones, one handhelt tablet and sometimes a laptop as well. What i tested meanwhile: AVM router (6490); Asus RT-AC66U (both in 2.4 and 5 GHz available) and a Huawei E5786 (only 2.4 GHz available). Alsobresetee Cura settings at the printer several times. With all router the connection was stable, if the distance to printer was less than 1,5m. If the distance is more than 3 m i get connection problems, but only after beginning a print (up to 1,5h). Thelast thing i had to check was the aerial of the Wifi, but i didn't want to dismount the printer cover, so i packed the printer into its box to send it back to my dealer. So thank you very much for your help and support, but i will not go on with that printer. Greetings, ich

Hi again, @SandervG tried to update the Firmware (Lan). In both cases (stable and test) printer told me, that i'm running the actual version (in display it showed version 4.2.5 dated 02.01.2018). So if you have a version i can test, please send it to me. Greetings

Hi @SandervG, thanks for your hint. That was the problem when starting with the printer. After new installation the SW and driver on the PC that was no longer that problem, because after switching on the printer I had directly access to it. During the first 2,5h print (after solving the problem descibed first) the network was disconnected after 1,5h and the printer was not longer accessable (see above). From this moment the printer was only reachable for some time (from 2 minutes up to 2 hours; problem was not solveable by switching off and on off the Wifi at the printer). After that time the printer was not reachabel by Wifi. LAN worked sometimes (Sunday and yesterday evening), but Wifi was not calculateable permanently reachable. I Discribed above, how I tried to fix it, but nothing worked for longer than several minutes. Thats the reason I posted the Log File from yesterday. Can you see any problem with the hardware there? Sure I'll try the testing FW, to doulbe check if it solves my actual proiblem too.

Hi, tested LAN (x.x.x.81), is now working, so that it seems not to be a routing issue or error in router mixing up IP adresses. Only Wifi (x.x.x.80) is the problem today (see above). Here you will find the log file from today (I hope someone can see something and has a fix, or is the hardware broken?): Log data: Jan 10 17:09:41 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:41 - WAR - app.models.printer:307 - Found printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=unreachable, authenticated=True) at IP 192.168.178.81 Jan 10 17:09:41 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:41 - WAR - app.models.printer:237 - Unable to contact printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=unreachable, authenticated=True) at IP 192.168.178.80 Jan 10 17:09:41 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:41 - WAR - app.libs.printer_api:137 - Failed to fetch system info for printer at http://192.168.178.80/api/v1 Jan 10 17:09:33 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:33 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:09:25 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:25 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:09:18 ultimakersystem-ccbdd3004504 connmand[210]: ntp: time slew -0.008988 s Jan 10 17:09:18 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {del} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE> Jan 10 17:09:18 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE> Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route 0.0.0.0 gw 192.168.178.1 scope 0 <UNIVERSE> Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route 192.168.178.1 gw 0.0.0.0 scope 253 <LINK> Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK> Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: ntp: time slew +0.008808 s Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} address 192.168.178.81/24 label eth0 family 2 Jan 10 17:09:17 ultimakersystem-ccbdd3004504 connmand[210]: Failed to set domainname to fritz.box Jan 10 17:09:17 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Registering new address record for 192.168.178.81 on eth0.IPv4. Jan 10 17:09:17 ultimakersystem-ccbdd3004504 avahi-daemon[303]: New relevant interface eth0.IPv4 for mDNS. Jan 10 17:09:17 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.178.81. Jan 10 17:09:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:17 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:09:13 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Registering new address record for fe80::cebd:d3ff:fe00:4504 on eth0.*. Jan 10 17:09:13 ultimakersystem-ccbdd3004504 avahi-daemon[303]: New relevant interface eth0.IPv6 for mDNS. Jan 10 17:09:13 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::cebd:d3ff:fe00:4504. Jan 10 17:09:12 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:12 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: Skipping disconnect of carrier, network is connecting. Jan 10 17:09:11 ultimakersystem-ccbdd3004504 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 operstate 6 <UP> Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 address CC:BD:D3:00:45:04 mtu 1500 Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP> Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {TX} 29 packets 9613 bytes Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {RX} 0 packets 0 bytes Jan 10 17:09:11 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE> Jan 10 17:09:11 ultimakersystem-ccbdd3004504 kernel: sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Jan 10 17:09:07 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:07 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:09:02 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:02 - WAR - app.models.printer:312 - Unable to contact printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=unreachable, authenticated=True) at IP 192.168.178.80 or find it via zeroconf. Jan 10 17:09:02 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:02 - WAR - app.models.printer:237 - Unable to contact printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=unreachable, authenticated=True) at IP 192.168.178.80 Jan 10 17:09:02 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:09:02 - WAR - app.libs.printer_api:137 - Failed to fetch system info for printer at http://192.168.178.80/api/v1 Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {del} route fe80:: gw :: scope 0 <UNIVERSE> Jan 10 17:09:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Interface eth0.IPv6 no longer relevant for mDNS. Jan 10 17:09:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::cebd:d3ff:fe00:4504. Jan 10 17:09:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Withdrawing address record for fe80::cebd:d3ff:fe00:4504 on eth0. Jan 10 17:09:00 ultimakersystem-ccbdd3004504 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Jan 10 17:09:00 ultimakersystem-ccbdd3004504 kernel: sun7i-dwmac 1c50000.ethernet eth0: Link is Down Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 operstate 2 <DOWN> Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 address CC:BD:D3:00:45:04 mtu 1500 Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {update} flags 36867 <UP> Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {TX} 29 packets 9613 bytes Jan 10 17:09:00 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {RX} 0 packets 0 bytes Jan 10 17:08:57 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:57 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:08:52 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:52 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:08:47 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:47 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:08:42 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:42 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:08:37 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:37 - WAR - app.libs.printer_api:127 - Failed to fetch status for printer at http://192.168.178.80/api/v1 Jan 10 17:08:36 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Registering new address record for fe80::cebd:d3ff:fe00:4504 on eth0.*. Jan 10 17:08:36 ultimakersystem-ccbdd3004504 avahi-daemon[303]: New relevant interface eth0.IPv6 for mDNS. Jan 10 17:08:36 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::cebd:d3ff:fe00:4504. Jan 10 17:08:36 ultimakersystem-ccbdd3004504 python3[299]: 2018-01-10 17:08:36,246 INFO registryFile Saving preferences to /var/lib/griffin/network_preferences.json Jan 10 17:08:35 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 17:08:35,527 WARNING marlinProtocolHandler Did not see an ack (2) for line: 126: M105 Jan 10 17:08:35 ultimakersystem-ccbdd3004504 connmand[210]: Skipping disconnect of carrier, network is connecting. Jan 10 17:08:35 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 operstate 6 <UP> Jan 10 17:08:35 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 address CC:BD:D3:00:45:04 mtu 1500 Jan 10 17:08:35 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {update} flags 102467 <UP,RUNNING,LOWER_UP> Jan 10 17:08:35 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {add} route fe80:: gw :: scope 0 <UNIVERSE> Jan 10 17:08:35 ultimakersystem-ccbdd3004504 kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Jan 10 17:08:35 ultimakersystem-ccbdd3004504 kernel: sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off Jan 10 17:08:33 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Registering new address record for fe80::20e:8eff:fe75:a015 on wlan0.*. Jan 10 17:08:33 ultimakersystem-ccbdd3004504 avahi-daemon[303]: New relevant interface wlan0.IPv6 for mDNS. Jan 10 17:08:33 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::20e:8eff:fe75:a015. Jan 10 17:08:32 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 operstate 2 <DOWN> Jan 10 17:08:32 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 address 00:0E:8E:75:A0:15 mtu 1500 Jan 10 17:08:32 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {update} flags 36867 <UP> Jan 10 17:08:32 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {TX} 1592 packets 1975791 bytes Jan 10 17:08:32 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {RX} 796 packets 64960 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:31 - WAR - app.models.printer:312 - Unable to contact printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=idle, authenticated=True) at IP 192.168.178.80 or find it via zeroconf. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:31 - WAR - app.models.printer:237 - Unable to contact printer Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=idle, authenticated=True) at IP 192.168.178.80 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 17:08:31 - WAR - app.libs.printer_api:137 - Failed to fetch system info for printer at http://192.168.178.80/api/v1 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 operstate 6 <UP> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 address 00:0E:8E:75:A0:15 mtu 1500 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {TX} 1592 packets 1975791 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {RX} 796 packets 64960 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 operstate 6 <UP> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 address 00:0E:8E:75:A0:15 mtu 1500 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {update} flags 36931 <UP,RUNNING> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {TX} 1592 packets 1975791 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {RX} 796 packets 64960 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 operstate 5 <DORMANT> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {newlink} index 3 address 00:0E:8E:75:A0:15 mtu 1500 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {update} flags 36867 <UP> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {TX} 1592 packets 1975791 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {RX} 796 packets 64960 bytes Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {add} route fe80:: gw :: scope 0 <UNIVERSE> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {del} route fe80:: gw :: scope 0 <UNIVERSE> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {del} route 192.168.178.0 gw 0.0.0.0 scope 253 <LINK> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {del} address 192.168.178.80/24 label wlan0 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Interface wlan0.IPv6 no longer relevant for mDNS. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::20e:8eff:fe75:a015. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Withdrawing address record for fe80::20e:8eff:fe75:a015 on wlan0. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 wpa_supplicant[246]: wlan0: CTRL-EVENT-DISCONNECTED bssid=d8:50:e6:cb:c6:28 reason=3 locally_generated=1 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 17:08:31,319 WARNING marlinProtocolHandler Did not see an ack (1) for line: 86: M105 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: Time request for server 192.168.178.1 failed (101/Network is unreachable) Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: Time request for server 192.168.178.1 failed (101/Network is unreachable) Jan 10 17:08:31 ultimakersystem-ccbdd3004504 kernel: wlan0: deauthenticating from d8:50:e6:cb:c6:28 by local choice (Reason: 3=DEAUTH_LEAVING) Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Interface wlan0.IPv4 no longer relevant for mDNS. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Leaving mDNS multicast group on interface wlan0.IPv4 with address 192.168.178.80. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Withdrawing address record for 192.168.178.80 on wlan0. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 operstate 2 <DOWN> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 address CC:BD:D3:00:45:04 mtu 1500 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {update} flags 36867 <UP> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 operstate 0 <UNKNOWN> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {newlink} index 2 address CC:BD:D3:00:45:04 mtu 1500 Jan 10 17:08:31 ultimakersystem-ccbdd3004504 connmand[210]: eth0 {update} flags 36931 <UP,RUNNING> Jan 10 17:08:31 ultimakersystem-ccbdd3004504 kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Jan 10 17:08:31 ultimakersystem-ccbdd3004504 kernel: sun7i-dwmac 1c50000.ethernet eth0: fail to init PTP. Jan 10 17:08:31 ultimakersystem-ccbdd3004504 kernel: No MAC Management Counters available Jan 10 17:08:31 ultimakersystem-ccbdd3004504 kernel: RX IPC Checksum Offload disabled Jan 10 17:00:09 ultimakersystem-ccbdd3004504 connmand[210]: ntp: time slew -0.072408 s Jan 10 16:45:19 ultimakersystem-ccbdd3004504 mjpg-streamer[260]: MJPG-streamer [260]: serving client: 192.168.178.76 Jan 10 16:43:05 ultimakersystem-ccbdd3004504 connmand[210]: ntp: time slew +0.093607 s Jan 10 16:40:44 ultimakersystem-ccbdd3004504 systemd[1]: Started Cleanup of Temporary Directories. Jan 10 16:40:44 ultimakersystem-ccbdd3004504 systemd[1]: Starting Cleanup of Temporary Directories... Jan 10 16:26:21 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:21 - INF - registryFile:122 - Saving preferences to /var/lib/griffin/cluster/preferences.json Jan 10 16:26:17 ultimakersystem-ccbdd3004504 wpa_supplicant[246]: wlan0: CTRL-EVENT-SIGNAL-CHANGE above=1 signal=-14 noise=9999 txrate=72200 Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.app:146 - Completed starting up the application in the background Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.dbus.cluster_service:79 - onAmountOfPrintersInClusterChanged(1) Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.libs.watchdog:96 - Thread <Thread(StartUp, started daemon -1579158432)> is long running and allowed to be unresponsive for 1 minutes. Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.services.scheduler.schedule_runner:41 - starting scheduleRunner Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.services.print_job_service:86 - Deleting unneeded directory or file '/var/spool/cluster/32753f9d-a514-4f20-9209-3db967734377'. Jan 10 16:26:17 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:17 - INF - app.services.printer_service:378 - not adding self to cluster because there is already a cluster that has added this printer Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.models.printer:111 - Printer [Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=ulti, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=printing, authenticated=True)] status [printing] -> UNKNOWN Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - INF - app.storage.event_store:217 - Loading took 0.525788 seconds to process 310 events. Jan 10 16:26:16 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:16,865 INFO registryFile Saving preferences to /var/lib/griffin/http_api_users.json Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/182e02da-e920-4e2c-b53d-4a404f01a688/RasPi_case_A-v6-Nov2015.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/48c6cf31-3258-4182-88d5-ee65e0fdc69d/RasPi_case_A-v6-Nov2015.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - INF - app.storage.event_store:214 - Loaded 250 events. Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/dcbdfa1c-1242-4e06-af46-83506d5500ec/heart_v3.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/8f8117ab-00ee-4e3f-a4dd-99e45c7cfeed/IWATCH.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/2dcd2075-ef16-48ec-9460-7586e8831069/Druckkopfhalterung.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/29abfaee-4be9-4295-950a-614e70fac9b5/heart_v5_-_stamp_test2.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/cb48480c-8cd4-420f-93e9-e8a5738ad565/Rolle_v1.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.models.printer:111 - Printer [Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=UltiLars, uuid=5c1b27de-9632-4958-a10d-56bd6492a667, enabled=True, reserved_by=None, status=unknown, authenticated=False)] status [unknown] -> UNKNOWN Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/e9f27543-ce1c-44f8-8a9f-ac2c99f49482/wandstarke_test.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/73455c44-f685-4e86-9071-e3626a2d21f5/heart_v3.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/ccd17681-c107-416e-8f75-a59807e231e7/lionsringflat-fix.curaproject.3mf.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/917c5794-8577-412b-8e9c-676e34a40d9f/lionsringflat-fix.curaproject.3mf.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/0b09e584-9559-4786-9b0f-7e6fbb8e2557/lionsringflat-fix.curaproject.3mf.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.libs.g_code_parser:126 - G-code file [/var/spool/cluster/5ef84a52-684e-4950-af08-44f96ce71002/Lowpoly_scorpion.gcode.gz]: does not contain any extruder train data Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - WAR - app.models.printer:111 - Printer [Printer(unique_name=ultimakersystem-ccbdd3004504, friendly_name=Ultimaker-004504, uuid=e7649dbe-caf4-4130-bdbd-5d753a5dd5d0, enabled=True, reserved_by=None, status=unknown, authenticated=True)] status [unknown] -> UNKNOWN Jan 10 16:26:16 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:16 - INF - app.storage.event_store:207 - Loading all events Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.app:129 - Starting up the application in the background Jan 10 16:26:15 ultimakersystem-ccbdd3004504 systemd[1]: Startup finished in 2.230s (kernel) + 30.023s (userspace) = 32.254s. Jan 10 16:26:15 ultimakersystem-ccbdd3004504 systemd[1]: Reached target Target running the griffin services. Jan 10 16:26:15 ultimakersystem-ccbdd3004504 systemd[1]: Starting Target running the griffin services. Jan 10 16:26:15 ultimakersystem-ccbdd3004504 systemd[1]: Started Print cluster server. Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.libs.watchdog:121 - Signaling application started Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.libs.printer_discovery:134 - Started printer discovery. Jan 10 16:26:15 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:15,569 INFO systemService Added dbus service 'cluster' to the reset callbacks with function 'resetSettings' Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.stats.statistics_logger:31 - Stats cluster.id: d3630e12-9017-41cf-b7dc-da656faa2181 Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - PrintMonitorService:44 - Starting Printer Monitor Service... Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - timerRegistry:80 - Setting up thread for registryFile: 'preferences.json' Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - registryFile:110 - Reading preferences from /var/lib/griffin/cluster/preferences.json Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.settings:95 - Package Version 2017.12.04-2 Jan 10 16:26:15 ultimakersystem-ccbdd3004504 flipflop_wsgi.py[408]: 16:26:15 - INF - app.settings:90 - Image Version: 4.2.5.20180102 Jan 10 16:26:13 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:13,299 INFO registryFile Saving preferences to /var/lib/griffin/main_lighting.json Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,266 INFO server adding rule: /api/v1/history/events Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,260 INFO server adding rule: /api/v1/history/print_jobs/<uuid> Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,257 INFO server adding rule: /api/v1/history/print_jobs Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,253 INFO server adding rule: /api/v1/debug/marlin/success Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,250 INFO server adding rule: /api/v1/debug/marlin/errors Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,247 INFO server adding rule: /api/v1/debug/marlin Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,243 INFO server adding rule: /api/v1/print_job/reprint_original_uuid Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,240 INFO server adding rule: /api/v1/print_job/result Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,236 INFO server adding rule: /api/v1/print_job/state Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,232 INFO server adding rule: /api/v1/print_job/source_application Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,222 INFO server adding rule: /api/v1/print_job/source_user Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,219 INFO server adding rule: /api/v1/print_job/source Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,215 INFO server adding rule: /api/v1/print_job/datetime_cleaned Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,202 INFO server adding rule: /api/v1/print_job/datetime_finished Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,199 INFO server adding rule: /api/v1/print_job/datetime_started Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,196 INFO server adding rule: /api/v1/print_job/uuid Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,193 INFO server adding rule: /api/v1/print_job/progress Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,190 INFO server adding rule: /api/v1/print_job/time_total Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,186 INFO server adding rule: /api/v1/print_job/time_elapsed Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,172 INFO server adding rule: /api/v1/print_job/name Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,167 INFO server adding rule: /api/v1/camera/feed Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,162 INFO server adding rule: /api/v1/system/time/utc Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,158 INFO server adding rule: /api/v1/system/hardware/revision Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,154 INFO server adding rule: /api/v1/system/hardware/typeid Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,150 INFO server adding rule: /api/v1/system/memory/total Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,147 INFO server adding rule: /api/v1/system/memory/used Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,142 INFO server adding rule: /api/v1/system/time Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,139 INFO server adding rule: /api/v1/system/display_message Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,135 INFO server adding rule: /api/v1/system/country Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,132 INFO server adding rule: /api/v1/system/language Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,128 INFO server adding rule: /api/v1/system/log Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,125 INFO server adding rule: /api/v1/system/hardware Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,122 INFO server adding rule: /api/v1/system/variant Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,119 INFO server adding rule: /api/v1/system/type Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,114 INFO server adding rule: /api/v1/system/memory Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,111 INFO server adding rule: /api/v1/system/firmware Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,103 INFO server adding rule: /api/v1/system/guid Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,099 INFO server adding rule: /api/v1/system/name Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,096 INFO server adding rule: /api/v1/system/hostname Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,093 INFO server adding rule: /api/v1/system/uptime Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,090 INFO server adding rule: /api/v1/system/platform Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,084 INFO server adding rule: /api/v1/printer/network/ethernet/enabled Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,081 INFO server adding rule: /api/v1/printer/network/ethernet/connected Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,068 INFO server adding rule: /api/v1/printer/network/wifi/ssid Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,052 INFO server adding rule: /api/v1/printer/network/wifi/mode Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,048 INFO server adding rule: /api/v1/printer/network/wifi/enabled Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,045 INFO server adding rule: /api/v1/printer/network/wifi/connected Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,031 INFO server adding rule: /api/v1/printer/network/ethernet Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,029 INFO server adding rule: /api/v1/printer/network/wifi_networks/<ssid> Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,025 INFO server adding rule: /api/v1/printer/network/wifi_networks/<ssid> Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,013 INFO server adding rule: /api/v1/printer/network/wifi_networks Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:12,003 INFO server adding rule: /api/v1/printer/network/wifi Jan 10 16:26:12 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,989 INFO server adding rule: /api/v1/printer/bed/temperature/target Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,957 INFO server adding rule: /api/v1/printer/bed/temperature/current Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,953 INFO server adding rule: /api/v1/printer/bed/pre_heat Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,950 INFO server adding rule: /api/v1/printer/bed/temperature Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,945 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/offset/state Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,941 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/offset/z Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,937 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/offset/y Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,933 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/offset/x Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,928 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/temperature/target Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,924 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/temperature/current Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,907 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics/last_material_guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,901 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics/last_material_guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,896 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics/max_temperature_exposed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,892 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics/time_spent_hot Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,887 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics/material_extruded Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,883 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/serial Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,879 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/offset Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,874 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/id Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,869 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/temperature Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,865 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend/statistics Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,851 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/active_material/GUID Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,847 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/active_material/guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,842 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/active_material/length_remaining Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,838 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/feeder/max_speed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,834 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/feeder/jerk Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,828 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/feeder/acceleration Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,824 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/hotend Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,820 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/active_material Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,815 INFO server adding rule: /api/v1/printer/heads/0/extruders/1/feeder Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,811 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/offset/state Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,806 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/offset/z Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,801 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/offset/y Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,797 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/offset/x Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,789 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/temperature/target Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,782 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/temperature/current Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,779 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics/last_material_guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,773 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics/last_material_guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,764 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics/max_temperature_exposed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,759 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics/time_spent_hot Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,754 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics/material_extruded Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,750 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/serial Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,746 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/offset Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,742 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/id Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,738 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/temperature Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,733 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend/statistics Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,729 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/active_material/GUID Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,725 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/active_material/guid Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,720 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/active_material/length_remaining Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,716 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/feeder/max_speed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,712 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/feeder/jerk Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,707 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/feeder/acceleration Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,702 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/hotend Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,697 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/active_material Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,692 INFO server adding rule: /api/v1/printer/heads/0/extruders/0/feeder Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,688 INFO server adding rule: /api/v1/printer/heads/0/extruders/1 Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,684 INFO server adding rule: /api/v1/printer/heads/0/extruders/0 Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,680 INFO server adding rule: /api/v1/printer/heads/0/max_speed/z Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,677 INFO server adding rule: /api/v1/printer/heads/0/max_speed/y Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,673 INFO server adding rule: /api/v1/printer/heads/0/max_speed/x Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,669 INFO server adding rule: /api/v1/printer/heads/0/jerk/z Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,665 INFO server adding rule: /api/v1/printer/heads/0/jerk/y Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,657 INFO server adding rule: /api/v1/printer/heads/0/jerk/x Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,651 INFO server adding rule: /api/v1/printer/heads/0/position/z Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,648 INFO server adding rule: /api/v1/printer/heads/0/position/y Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,635 INFO server adding rule: /api/v1/printer/heads/0/position/x Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,629 INFO server adding rule: /api/v1/printer/heads/0/extruders Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,622 INFO server adding rule: /api/v1/printer/heads/0/acceleration Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,615 INFO server adding rule: /api/v1/printer/heads/0/fan Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,611 INFO server adding rule: /api/v1/printer/heads/0/max_speed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,608 INFO server adding rule: /api/v1/printer/heads/0/jerk Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,603 INFO server adding rule: /api/v1/printer/heads/0/position Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,599 INFO server adding rule: /api/v1/printer/heads/0 Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,595 INFO server adding rule: /api/v1/printer/led/blink Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,589 INFO server adding rule: /api/v1/printer/led/brightness Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,582 INFO server adding rule: /api/v1/printer/led/saturation Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,577 INFO server adding rule: /api/v1/printer/led/hue Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,572 INFO server adding rule: /api/v1/printer/validate_header Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,566 INFO server adding rule: /api/v1/printer/network Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,559 INFO server adding rule: /api/v1/printer/diagnostics/temperature_flow/<int:row_count> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,544 INFO server adding rule: /api/v1/printer/diagnostics/cap_sensor_noise/<int:loop_count>/<int:sample_count> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,530 INFO server adding rule: /api/v1/printer/diagnostics/cap_sensor_noise/<int:loop_count> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,509 INFO server adding rule: /api/v1/printer/diagnostics/cap_sensor_noise Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,463 INFO server adding rule: /api/v1/printer/diagnostics Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,457 INFO server adding rule: /api/v1/printer/beep Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,446 INFO server adding rule: /api/v1/printer/status Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,419 INFO server adding rule: /api/v1/printer/bed Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,413 INFO server adding rule: /api/v1/printer/heads Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,410 INFO server adding rule: /api/v1/printer/led Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,407 INFO server adding rule: /api/v1/history Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,404 INFO server adding rule: /api/v1/debug Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,391 INFO server adding rule: /api/v1/coffee Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,384 INFO server adding rule: /api/v1/auth/verify Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:11,376 INFO registryFile Saving preferences to /var/lib/griffin/nfc_hotend_tag_links.json Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,372 INFO server adding rule: /api/v1/auth/check/<auth_id> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,369 INFO server adding rule: /api/v1/auth/request Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,366 INFO server adding rule: /api/v1/print_job Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,361 INFO server adding rule: /api/v1/materials/<guid> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,359 INFO server adding rule: /api/v1/materials/<guid> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,354 INFO server adding rule: /api/v1/materials/<guid> Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,351 INFO server adding rule: /api/v1/materials Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,347 INFO server adding rule: /api/v1/camera/<index>/snapshot Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,343 INFO server adding rule: /api/v1/camera/<index>/stream Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,340 INFO server adding rule: /api/v1/camera Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,333 INFO server adding rule: /api/v1/system Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,331 INFO server adding rule: /api/v1/printer Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,327 INFO server adding rule: /api/v1 Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:11,324 INFO root Starting service: UM3Server Jan 10 16:26:11 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:11,321 INFO systemService Added dbus service 'auth_api' to the reset callbacks with function 'resetSettings' Jan 10 16:26:10 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:10,866 INFO server adding rule: /static/<path:filename> Jan 10 16:26:10 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:10,842 INFO threadpool Threadqueue increasing, currently has 0 workers, starting 10 extra worker(s) Jan 10 16:26:10 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:10,836 INFO timerRegistry Setting up thread for registryFile: 'http_api_users.json' Jan 10 16:26:10 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:10,831 INFO registryFile Reading preferences from /var/lib/griffin/http_api_users.json Jan 10 16:26:10 ultimakersystem-ccbdd3004504 python3[402]: 2018-01-10 16:26:10,456 INFO avahiService Registered service on avahi (ultimakersystem-ccbdd3004504) Jan 10 16:26:09 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:09,952 INFO systemUpdate Comparing firmware 'stable' old version '4.2.5.20180102' with new version '4.2.5.20180102' with result: True Jan 10 16:26:09 ultimakersystem-ccbdd3004504 python3[402]: 2018-01-10 16:26:09,553 INFO root Starting service: AvahiService Jan 10 16:26:09 ultimakersystem-ccbdd3004504 python3[402]: 2018-01-10 16:26:09,061 INFO root Creating service: AvahiService Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_hotend_pid' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_power_budget_management' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_motor_current' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'hotend_prime_location' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'temperature_compensation_build_plate' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'movement_volume' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'active_leveling_settings' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'build_volume' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_axis_inverted' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'maximum_speed_limit' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_steps_per_mm' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'hardware' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'temperature_compensation_hotends' - 'a' Jan 10 16:26:09 ultimakersystem-ccbdd3004504 jedi-display[385]: Unknown dict variant type: 'default_bed_pid' - 'a' Jan 10 16:26:08 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:08,464 INFO nfcController Tag b'\x04\x98\xab\x02\x85X\x80' found and linked to hotend_1 Jan 10 16:26:08 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:08,463 INFO nfcPrinterHotendInfo Material GUID fe15ed8a-33c3-4f57-a2a7-b4b78a38c3cb => properties = dbus.Dictionary({dbus.String('density'): dbus.Double(1.23, variant_level=1), dbus.String('diameter'): dbus.Double(2.85, variant_level=1)}, signature=dbus.Signature('sv')) Jan 10 16:26:08 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:08,355 INFO registryFile Saving preferences to /var/lib/griffin/printer_hotend_1_preferences.json Jan 10 16:26:08 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:08,306 INFO registryFile Saving preferences to /var/lib/griffin/printer_hotend_0_preferences.json Jan 10 16:26:08 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:08,015 INFO registryFile Saving preferences to /var/lib/griffin/printer_preferences.json Jan 10 16:26:07 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:07,293 INFO timerRegistry Setting up thread for registryFile: 'main_lighting.json' Jan 10 16:26:07 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:07,291 INFO registryFile Reading preferences from /var/lib/griffin/main_lighting.json Jan 10 16:26:07 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:07,242 INFO threadpool Threadqueue increasing, currently has 0 workers, starting 10 extra worker(s) Jan 10 16:26:07 ultimakersystem-ccbdd3004504 python3[197]: 2018-01-10 16:26:07,213 WARNING dbusif DBus call took longer than allowed: 0.313251: <function JobHistoryService.getJobByUuid at 0xa5586660>((<griffin.history.jobHistoryService.JobHistoryService at /nl/ultimaker/job_history at 0xa663b150>, dbus.String('16851ae1-aa5c-441f-be59-9cb53fb045d9')), {}) Jan 10 16:26:07 ultimakersystem-ccbdd3004504 kernel: random: crng init done Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,892 INFO controller last print started (dbus.Double(1515533609.453792), dbus.String('16851ae1-aa5c-441f-be59-9cb53fb045d9'), dbus.String('RasPi_case_A-v6-Nov2015') Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[192]: 2018-01-10 16:26:06,886 WARNING dbusif DBus call took longer than allowed: 0.230621: <function EventHistoryService.getEventsByType at 0xa552bfa8>((<griffin.history.eventHistoryService.EventHistoryService at /nl/ultimaker/event_history at 0xa65ec150>, dbus.Int32(131072), dbus.Int32(0), dbus.Int32(1)), {}) Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,741 INFO marlinProtocolHandler Set hotend compensation index=1 offset=0.75 ** Jan 10 16:26:06 ultimakersystem-ccbdd3004504 systemd[1]: Starting Print cluster server... Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,701 INFO marlinProtocolHandler Set hotend compensation index=1 factor=0.98 ** Jan 10 16:26:06 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin Avahi zeroconf service. Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,584 INFO printerStateProperty State change: booting -> idle Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,485 INFO materialManager Updating material settings for hotend 1 with id BB 0.4 Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,449 INFO hotendCartridgeManager _updateHotendPresent constructing new HotendV1(1, b'\xc4\x9a]\x1e\x00\x00') Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,418 INFO marlinProtocolHandler Set hotend compensation index=0 offset=0.00 ** Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:06,401 INFO marlinProtocolHandler Set hotend compensation index=0 factor=1.00 ** Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[384]: 2018-01-10 16:26:06,340 INFO root Creating service: UM3Server Jan 10 16:26:06 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:06,207 INFO systemUpdate The current version (4.2.5.20180102) == previous (4.2.5.20180102) Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,973 INFO marlinProtocolHandler ** Set buildplate compensation offset=0.0000000000 ** Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,903 INFO marlinProtocolHandler ** Set buildplate compensation factor=1.0000000000 ** Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/12x24.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,818 INFO marlinProtocolHandler A1335 Delayed setting direction sensor nr: 1 Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,791 INFO marlinProtocolHandler A1335 Delayed setting direction sensor nr: 0 Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/10x20.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/9x18.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/8x16.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/9x15.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:05,671 INFO root Starting service: NfcService Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/7x14.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:05,661 INFO systemService Added dbus service 'nfc' to the reset callbacks with function 'resetSettings' Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/7x13.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/6x12.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,551 INFO materialManager Updating material settings for hotend 0 with id AA 0.4 Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/6x10.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/6x9.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/5x8.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,485 INFO hotendCartridgeManager _updateHotendPresent constructing new HotendV1(0, b't\xc5\x1a\x1f\x00\x00') Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/5x7.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Loading font file: /usr/share/fonts/X11/misc/4x6.pcf.gz Jan 10 16:26:05 ultimakersystem-ccbdd3004504 jedi-display[385]: Selected language: de Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:05,321 INFO threadpool Threadqueue increasing, currently has 0 workers, starting 10 extra worker(s) Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:05,319 INFO timerRegistry Setting up thread for registryFile: 'nfc_hotend_tag_links.json' Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:05,317 INFO registryFile Reading preferences from /var/lib/griffin/nfc_hotend_tag_links.json Jan 10 16:26:05 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin Human Machine Interface service. Jan 10 16:26:05 ultimakersystem-ccbdd3004504 systemd[1]: Starting Griffin Human Machine Interface service... Jan 10 16:26:05 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin HTTP service. Jan 10 16:26:05 ultimakersystem-ccbdd3004504 systemd[1]: Starting Griffin HTTP service... Jan 10 16:26:05 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin nfc service. Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: ok N3 P15 *7CBF Jan 10 16:26:05 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:05,014 INFO marlinDriver Marlin info: MACHINE_TYPE:UM3 PCB_ID:2 BUILD:"Dec 22 2017 15:01:31" Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,992 INFO hotendCartridgeManager setPresentChanged(1 is present) Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,983 INFO hotendCartridgeManager setPresentChanged(0 is present) Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:04,957 INFO root Starting service: LedService Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:04,953 INFO systemService Added dbus service 'led' to the reset callbacks with function 'resetSettings' Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,912 INFO marlinProtocolHandler M999 handled, communication with Marlin established Jan 10 16:26:04 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin led service. Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[380]: 2018-01-10 16:26:04,833 INFO root Creating service: NfcService Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[379]: 2018-01-10 16:26:04,616 INFO root Creating service: LedService Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,551 INFO marlinLowLevelCommunication Opening serial port: /dev/ttyS1 Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,549 INFO printerService Procedure finished: HARDWARE_INITIALIZATION Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:04,528 INFO procedure HardwareInitializationProcedure(key='HARDWARE_INITIALIZATION') transitioning from InitiateHardwareInitialization(key='FIRMWARE_UPDATE_CHECKING') --> None Jan 10 16:26:04 ultimakersystem-ccbdd3004504 python3[299]: 2018-01-10 16:26:04,206 INFO registryFile Saving preferences to /var/lib/griffin/network_preferences.json Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,742 INFO root Starting service: PrinterService Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,742 INFO printerService WELCOME_SETUP_WIZARD completed: True Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,741 INFO printerService FACTORY_SETUP_WIZARD completed: True Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,738 WARNING registry Retrieved unset preference: FIRST_RUN_COMPLETED Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:03,727 INFO systemService Added dbus service 'printer' to the reset callbacks with function 'resetSettings' Jan 10 16:26:03 ultimakersystem-ccbdd3004504 systemd[1]: Starting Griffin nfc service... Jan 10 16:26:03 ultimakersystem-ccbdd3004504 systemd[1]: Starting Griffin led service... Jan 10 16:26:03 ultimakersystem-ccbdd3004504 systemd[1]: Starting Griffin Avahi zeroconf service... Jan 10 16:26:03 ultimakersystem-ccbdd3004504 systemd[1]: Started Griffin printer service. Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,580 INFO controller Compensating setup for 2 hotends Jan 10 16:26:03 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:03,536 INFO headPositionProcedure x: 0.0 y: 0.0 z: 0.0 Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,579 INFO printerData Loading machine data from 9066.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,574 INFO printerData Loading machine data from um3.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,573 INFO printerData successfully loaded: /usr/share/griffin/griffin/printer/../../griffin/machines/um3.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,397 INFO printerData successfully loaded: /usr/share/griffin/griffin/printer/../../griffin/machines/9066.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,375 INFO materialManager Updating material settings for hotend 1 with id Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,366 INFO materialManager Updating material settings for hotend 0 with id Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,334 INFO timerRegistry Setting up thread for registryFile: 'printer_hotend_1_preferences.json' Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,331 INFO registryFile Reading preferences from /var/lib/griffin/printer_hotend_1_preferences.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,293 INFO timerRegistry Setting up thread for registryFile: 'printer_hotend_0_preferences.json' Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,291 INFO registryFile Reading preferences from /var/lib/griffin/printer_hotend_0_preferences.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,270 INFO dataLogger Created data logger TemperatureFlow with 52428 rows Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,243 INFO printerData Loading machine data from 9066.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,239 INFO printerData Loading machine data from um3.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,238 INFO printerData successfully loaded: /usr/share/griffin/griffin/printer/../../griffin/machines/um3.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:02,056 INFO printerData successfully loaded: /usr/share/griffin/griffin/printer/../../griffin/machines/9066.json Jan 10 16:26:02 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:01,999 INFO threadpool Threadqueue increasing, currently has 0 workers, starting 10 extra worker(s) Jan 10 16:26:01 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:01,997 INFO timerRegistry Setting up thread for registryFile: 'printer_preferences.json' Jan 10 16:26:01 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:01,994 INFO registryFile Reading preferences from /var/lib/griffin/printer_preferences.json Jan 10 16:26:01 ultimakersystem-ccbdd3004504 connmand[210]: ntp: time slew +0.053110 s Jan 10 16:26:01 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {del} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE> Jan 10 16:26:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Registering new address record for fe80::20e:8eff:fe75:a015 on wlan0.*. Jan 10 16:26:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: New relevant interface wlan0.IPv6 for mDNS. Jan 10 16:26:00 ultimakersystem-ccbdd3004504 avahi-daemon[303]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::20e:8eff:fe75:a015. Jan 10 16:26:00 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:00,531 INFO registryFile Saving preferences to /var/lib/griffin/system_update_notification.json Jan 10 16:26:00 ultimakersystem-ccbdd3004504 python3[194]: 2018-01-10 16:26:00,496 INFO registryFile Saving preferences to /var/lib/griffin/system_preferences.json Jan 10 16:26:00 ultimakersystem-ccbdd3004504 connmand[210]: wlan0 {add} route 212.227.81.55 gw 192.168.178.1 scope 0 <UNIVERSE> Jan 10 16:26:00 ultimakersystem-ccbdd3004504 python3[348]: 2018-01-10 16:26:00,267 INFO root Creating service: PrinterService Jan 10 16:26:00 ultimakersystem-ccbdd3004504 systemd[1]: Time has been changed

At the moment it is looking like that again: No print over Network possible. It seems, that I'll send the printer back. I'm not sure, if I want to go on.

Hi all together, @ macio: yes, in meantime I agree to you. Worked for 1 Print after installin PC SW new. Yesterday it took me 3h to get a connection to the printer by network (switching on or off of the printer or the network interface of the printer has reestablished the connection). Not even a ping has worked, so it couldn't be the sw which I reinstalled. The strange thing is: if I ping to the IP of the printer: e.g. x.x.x.80 (printer never had an other IP, no other device had the IP before) I get back x.x.x.65 does not answer, sometimes I got back x.x.x.35 does not answer (35 is the IP address of an other deivce in the network, which was switched off during the ping). That seems to sustain your theorie. A seach for "wrong IP address by ping" only showed some DNS problems and how to fix, but no name was used, only the IP so that DNS should not be the problem. Nothing worked to get back the network connection: Other PC, other Wifi, other Router, switchin off or restarting one of the devices. Even a new installation/configuration of the printer Wifi/Lan hasn't established the connection again. I got back the network connection only by switching off all devices (ALL: Router, Wifi, PC, printer) for approx 15 min. (it is a hard long time 15 minutes without internet or phone!). After switching on all devices I got a new firmware for the printer. Then, after switching on all devices AND inatalling the new FW the connection worked (tested until this morning). @SandervG: I've log datas stored from Sunday, when the Wifi connection lost during a print (No acces to the printer possible, same ping result like described above in this post). That I can send you, if that helps. If there is a log file stored in the printer (and I can access them later), I can send the datas from yesterday also, but I had no chance to copy them, because of no access to the printer until switched off. Best regards, ich

Hi Macio, thanks for your comment. New IP address for the printer I can eleminate: 2 days in use and IP lease time is approx 30 days from DHCP Server. Additinal to that the shown IP is not in the range of the IP addresses the Server assigns. I solved the problem as follows: Deleted the Software, all drivers and configurations from PC (Only the SW is not enough). After new installation and configuration all is working fine. So there went something wron during installation of the drivers (copy error, somthing strange written during installation, what ever). Why it worked after disabeling the Lan/Wifi and enabeling again, I don't know. But that shows, that the Frimware and the driver can check the problem and solve it by themselves. Reason of that procedure: The printer was every time available by ping or browser (Log Data; temepratures) over network after switching on the printer. The problem was only available when entering the functionality of the Cura driver (printer queue; printer details) for the printer. That indicated, that it was somthing with the SW/driver. Macio, maybe you can double check this solution? Thanks, best regards, Ich

Hi Everybody, it seems, that I'm not the only one with that problem: That sonds quite similar incl. the temporary solution. I assume it is the same issue. I hope the more details can help to find the cause of that issue. Thanks, greetings Ich

Hi Macio, it seems you have the same problem than I. See here: It is not only limited to Cura and also not the Wifi (LAN has the same problem => can you verify that?). Can you double check your IP shown in printer details als marked in my pictures? Still with the newest Firmware v4.2.5! Have you solved that problem meanwhile? Greetings, Ich

Hi all together, I've got a UM3 couple of days ago. Network configuration was easy and is running apart from following problem: After switching on the printer I have only partial access from PC to the printer. That means, I can enter the IP in the browser and can see the Log Datas and the temperatures. Whne I go to printer queue the window tells me, the priter connection was lost (see attached pictures; unfortunaltely in german). When I change to printer details I get also the message, printer is not connected AND it shows me a different IP adress in the details (marked red in the pictures). The next strange thing is: When I switch of and on again the network (doesn't matter if Wifi or LAN) at the printer menue (without changein anything else) I have normal full access to the printer and if POrints in the queue, they start imediately! Tests / datas: - Problem is the same with LAN and Wifi; - DHCP adress is comming from an AVM router - Newest Firmware is installed (over Wifi) v4.2.5 (same problem with the previous Firmware) - Problem starts again after switching off and on the printer and can only be soved when switching off and on the network device (Wifi or LAN) at the printer menue. - The Network information at the printer shows the correct IP and Names (every time). - The router and all network devices show the printer with correct IP (every time). Does anybody know that problem? Is the printer electronic broken? Is there a solution, to fix that without running to the printer and switching menue options each time? Thank you in advance for your support ond/or comment. Grettings Ich