alexbln01
-
Posts
27 -
Joined
-
Last visited
-
Days Won
1
Content Type
Forums
Events
3D Prints
Posts posted by alexbln01
-
-
-
Hoffen wir mal das dies dann nach den nächsten Update weg ist.....
- 1
-
Hallöchen, wird das Kabel einfach nur wieder Abisoliert und dann fest rein geschoben oder wie muss man das machen !?
-
Nachdem ich das zweite Factory File von S3d bekommen habe läuft S3d nun wieder richtig.....ersteinmal Herzlichen Dank an Simplify fur den schnellen Support, haben immer inerhalb von einem Tag geantwortet.....jetzt muss Ultimaker nur noch das Fiepen in der nächsten Firmeware weg bekommen und ich bin zufrieden 😎
-
Symplify 3d hat sich gemeldet 🙂
Weiß irgend jemand ob Ultimaker an den Fehler der Firmeware arbeitet !? Ne Rückmeldung geben sie ja gerade nicht....
----------------------------
Alexander,
Thanks for your reply. Please give this new profile a shot. I've reproduced the described behavior in our office this morning and updated the profile to account for that issue.
Thanks,
----------------------------
Ultimaker_3ExtendedFIRM5.2.8_PLA_RightExtruder_2019-03-29.fff.zip
- 1
-
Kommando zurück mit s3d......
Also man kann die Datei auswählen, er heizt dann das Bed und komischerweise alle beide Extruder....
Wenn er sie warm hat dann fängt er mit dem Linken an das Skirt zu Drucken, ist auch normal da ich momentan mit Links Drucken möchte.... Was aber dann passiert ist mir ein Rätzel....Er fährt nach rechts, zieht die rechte Düse runter und versucht dann mit links weiter zu Drucken, da die rechte Düse noch unten ist Druckt er dann natürlich mit der linken Düse in der Luft....
Also: Warum heizt er beide Hottends und zieht die rechte Düse nach dem Skirt Drucken runter 😞 !?
Werde das mal als Antwort an Simplify3d schicken.....
Was ich noch mit der Firmware habe ist ein nervender surrender Ton, wenn ich das Rädchen bewege ist es weg, kommt dann aber irgendwann zurück....
Aber ansonsten muss ich Ultimaker mal loben, echt toll was sie aus den Ulti3 noch raus geholt haben....selbst das Drucken über der Handy App funktioniert nun mit nen Vorschaubild, die Benachrichtigung funktioniert nun auch....Druck gestartet, abgebrochen und beendet 🙂
-
-
Habe von Simplify 3d eine FFF Datei bekommen....
Somit funktioniert der Ulti 3 Extended wieder mit Simplify3d 🙂
Wer Interesse hat der meldet sich per PN....
Oder darf ich diese Datei hier hochladen !?
-
Für mich wäre es am einfachsten wenn jemand mal ein funktionierendes s3d Profil hochladen könnte....
Dann könnte ich vergleichen was bei mir nicht stimmt....
-
Also lösche ich meinen und kopiere diesen da rein !? Aber das habe ich gemacht, er bricht gleich ab und geht ins Haupt-Menü.....
-
Hallo, bei mir funktioniert s3d auch nicht mehr !!
Wie und wo muss ich den Header rein kopieren ?
Hat jemand ein Bildchen dazu ?
-
if i slice with cura and save the file on a usb stick then the ulti3 will print it .... if i want to slice it with s3d and print it via usb then it will print nothing anymore, it will read it in a moment and go back to the menu .... please change it again .... or find a way that I come back to the old ulti firmeware ....
-
22 hours ago, Smithy said:
Updated successfully my UM3 and S5, without any problems.
But one minor issue on the UM3. The printer had a high-frequency buzzing noise after startup which was not there before. After a power off/on, the noise comes again when the printer has finished booting. So during the boot, there is nothing, when it is ready the buzzing noise is there again. I cannot locate the source of the sound, but it was interesting, that after turning the dial button the noise was gone.
So for me, it is not an issue, I usually never turn off the printers, and if so, I just have to move the button a little bit to get rid of the sound. But I want to report it if you want to take a look into it.
the noise I have too .... it annoys .... if you move the wheel it is a short way away but it comes again ....
-
t is the same for me, after the update no s3d files can be printed anymore
-
-
-
Hallo, habe meinen Druckkopf beim Ultimaker 3 auseinander gebaut um die Lüfter zu reinigen.....nach dem Zusammenbau geht die Automatische Lüftersteuerung nicht mehr.....die Lüfter kann ich aber manuell laufen lassen....
Beim Einschalten laufen kurz die beiden Lüfter im Druckkopf....
-
Hallo, habe meinen Druckkopf beim Ultimaker 3 auseinander gebaut um die Lüfter zu reinigen.....nach dem Zusammenbau geht die Automatische Lüftersteuerung nicht mehr.....die Lüfter kann ich aber manuell laufen lassen....
-
Try simplify3d ?
-
Hallo, hast Du die Astrobox beim Ulti 3 am laufen bekommen ? Meine kommt heute und nun lese ich das sie nicht kompatibel sein soll....
-
Does anybody know if the automatic calibration is still working on the Ultimaker 3 Extended?
https://www.geckotek.co/product/geckotek-magnetic-base-build-plate-for-ultimaker-2-and-ultimaker-3/
-
-
hello .... can you install a function where you can set the z height in the menu a bit higher? especially for permanent printing plates it would be interesting so you could use the automatic active bedivelierung again .... had such a function on sigma ... you have the bed automatically leveled and then you could put it a little higher in the menu, this was synonymous then saved as a new z worth ....
-
If the client is authenticated, you can use the endpoint HTTP: // <Printer_IP> / Print Job / Gcode to download the Gcode of the currently printed object. ....... this function is cool .... I sometimes annoyed quickly printed on wifi and the gcode was gone .... will there be a function where you can store the gcode on the usb stick?
Ultimaker Firmware 5.2 stable
in Firmware
Posted
Exactly the error is my printer in the calibration synonymous, the cable is not, everything was checked, it did not work after the firmware update ... have my Ulti 3 Ex now sent to the dealer, but they are annoyed, for that is my time too bad ..... at the price I really expect a better care ..... and I am also of the opinion that it is more than 1% by the firmware problems have .... times one Another question: Can one be satisfied as a company if 1% of the customers are no longer satisfied? I would definitely not be ..... Happy Easter