Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

Personal Information

  • Field of Work
  • Country
  • 3D printer
    Cura 3.1
  1. I'm using Cura 3.1 (final, not beta) and saving gcode to micro SD card for an MP Select Mini v2. When I cancel my print job and then restart it, the print head on my printer travels all the way to right and then starts making a ratcheting sound like it wants to keep going further to the right, past the limits of the arm. I'm wondering if it's something in my gcode, because I have tried reducing the size of the print bed in Cura to 118mm (from 120mm) but it still does it. Not sure if this is a Cura issue or not, but the gcode worked in version 15 of Cura. Here's my gcode settings that I got from the MP Mini wiki: Start GCode: G28 ;home all axes G1 Z0.2 F1200 ;raise nozzle G92 E0 ;reset extrusion distance G1 X100 Y0 E12 F600 ;purge nozzle G92 E0 ;reset extrusion distance End GCode: M104 S0 ; turn off hotend/extruder heater M140 S0 ; turn off bed heater G91 ; set to relative positioning G1 E-2 F300 ; retract the filament a bit before lifting the nozzle to release some of the pressure G1 Z1 ; raise Z 1mm from current position G1 E-2 F300 ; retract filament even more G90 ; set to absolute positioning G1 X20 ; move X axis close to tower but hopefully far enough to keep the fan from rattling G1 Y120 ; move bed forward for easier part removal M84 ; disable motors G4 S360 ; keep fan running for 360 seconds to cool hotend and allow the fan to be turned off - adjust to your needs M107 ; turn off fan. Don't use M106 S1. Some say M107 doesn't work for them but if the hotend is below 70 degrees it should work
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!