Jump to content

zaniix

Dormant
  • Posts

    2
  • Joined

  • Last visited

Everything posted by zaniix

  1. https://ultimaker.com/en/products/cura-software/download-request/167
  2. I have this same exact issue in Cura 3.1.0. No matter what values I put into all the extruder temp fields and yes I changed all of them, it still outputs 210 into Gcode, see below ( and yes bed was set at zero on purpose) It changes to the correct temp much later in the gcode. I do not understand what is going on M104 S210 ; set extruder temp M140 S0.0 ; set bed temp M190 S0.0 ; wait for bed temp M109 S210 ; wait for extruder temp
×
×
  • Create New...