PhilDesign

ok make sense now

I want to print TPU without many string as possible with my UMO+. Can I put the Travelspeed up to 300mm/s or is that not good for the printer because it is to fast? May I use retraction? I use TPU A95 which is quit hard for a TPU. Thanks for any answer

Hey guys, I want to change my extruder of the ultimaker original plus to a better one? Do you have any ideas? Is it maybe possible to install the DDG Extruder kit Ultimaker 2+(http://shop.bondtech.se/ec/upgrade-kits/ultimaker/ddg-extruder_ultimaker2_en.html) on the UMO+? That would be perfect!! I know that you can change the marline software for the extruder and maybe it is possilbe. What do you think?

@gr5 Hey man you are awesome. It is working now! I had the bed temp at 20. I change it to zero and it is working now. Thank your very much!!! It is really weird that 20degrees draws more energy then for example 60degrees?! Do you know why? Thanks a lot!!!

Hallo guys, my UMO+ has problems printing TPU. When I am printing TPU after few layers the printer turn off and an very quickly, like using the switch very fast. After that the print is stopped, like it would be when you turn off and on the UMO+. I dont know why this is happening? When I print PLA there is no issue. I also tried to print the same G-Code of the TPU with PLA and I have no problems. I also printed the G-Code for a PLA part with TPU and it doesn't work. TPU settings: Nozzle 220 Bed 20 Please help! Thanks for any help PhilDesign