BrightBerry
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by BrightBerry
-
-
Maybe the topic should be changed to "Issue with Cura 3.2 and Monoprice Select Mini (V2) / Malyan M200"
-
41 minutes ago, BrightBerry said:
Also had to set my antivirus and firewall to allow the program to run etc. (Commodo Internet Security), but that is not a big problem.
One real problem I'm having is that I'm able to add the Prusa Mk2 when I start Cura 3.2 but when I want to add the Monoprice Select Mini or Monoprice Select Mini V2 (E3D) the program closes (crashes I think) just after the Machine Settings window, tried to click the "Finish" button real quick, but didn't help, also uninstalled it normaly and when that didn't work, used Revo Uninstaller to make sure nothing is left of the program when uninstalling it, reinstalled it and still, same problem.
Tried a couple of other printers (Tevo Black Widow and Creality CR-10) and it worked fine to add these printers, seems that the problem only is there with the Monoprice Select Mini or Monoprice Select Mini V2 (E3D) printers.
Solution found for this bug/problem:
-
8 minutes ago, i_rupar said:
I noticed when I upgraded Cura today that anytime I tried to any the monoprice mini select, it would crash immediately. After digging around it looks like the problem is in the malyan_m200.def.json file. It is used for providing definiations for the MP mini select. To fix the problem edit \Ultimaker Cura 3.2\resources\definitions\malyan_m200.def.json
About 2/3rds of the way down there is a line
"material_diameter": { "value": 1.75 },
Change it to
"material_diameter": { "default_value": 1.75 },
save and all should be good. Hope this helps
That was the trick, thanks!
-
I have the same problem, also posted it in the other topic:
-
Also had to set my antivirus and firewall to allow the program to run etc. (Commodo Internet Security), but that is not a big problem.
One real problem I'm having is that I'm able to add the Prusa Mk2 when I start Cura 3.2 but when I want to add the Monoprice Select Mini or Monoprice Select Mini V2 (E3D) the program closes (crashes I think) just after the Machine Settings window, tried to click the "Finish" button real quick, but didn't help, also uninstalled it normaly and when that didn't work, used Revo Uninstaller to make sure nothing is left of the program when uninstalling it, reinstalled it and still, same problem.
Tried a couple of other printers (Tevo Black Widow and Creality CR-10) and it worked fine to add these printers, seems that the problem only is there with the Monoprice Select Mini or Monoprice Select Mini V2 (E3D) printers.
Welcome to Ultimaker Cura 3.2 | Stable
in UltiMaker Cura
Posted
Haven't had problems with this plugin.