Hi all,
This is my first time posting to the Ultimaker forums and hopefully I am in the correct place.
I have been using Cura as my primary slicer since I started 3D printing back in 2013, the last Cura build I used was the legacy version 15.04.6 and a little bit of 2.1.3 which had always worked well and I never made the move over to the newest versions of Cura.
Cura 2.1.3 use to work well but sometime last year it became unstable and I continued to use 15.04.6 without issues.
I decided to give the latest 3.2.1 build a go to see it no longer crashed with no luck. I am trying to figure out why the 2.x.x and 3.x.x versions of Cura always crash. (ive tried them all) I am assuming there was a windows update or a driver update that is creating all of these issues. 15.04.6 still works and never had any issues however it has been uninstalled while I try and solve the 3.2.1 crash issue.
The crashes are very inconsistent in nature but ALWAYS happen, I have yet to have a session of Cura end without issue. I believe the problem is from a faulty .dll file but I have not been able to resolve the issue. Any help would be really appreciated. I attached the cura.log file and below is what the Event View shows.
Event Viewer:
Fault bucket 2186857364538711821, type 4
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: Cura.exe
P2: 0.0.0.0
P3: 5a562cae
P4: Qt5Qml.dll
P5: 5.8.0.0
P6: 587fe2fc
P7: c0000005
P8: 0000000000172470
P9:
P10:
Faulting application name: Cura.exe, version: 0.0.0.0, time stamp: 0x5a562cae
Faulting module name: Qt5Qml.dll, version: 5.8.0.0, time stamp: 0x587fe2fc
Exception code: 0xc0000005
Fault offset: 0x0000000000172470
Faulting process id: 0x3e90
Faulting application start time: 0x01d3ac31e5bd3458
Faulting application path: C:\Program Files\Ultimaker Cura 3.2\Cura.exe
Faulting module path: C:\Program Files\Ultimaker Cura 3.2\Qt5Qml.dll
Report Id: 75e40b38-f4a7-4bf6-b8cc-f982144f9394
Faulting package full name:
Faulting package-relative application ID:
Any thoughts?
cura.log