victorgil

I have always used Dimafix spray I am printing it again with a new plate to see if it makes a difference. I will let you know the results.

Hi Nicolinux, I used the default print settings for PLA at 60 degrees for the bed temperature. I have bed leveling enabled and I did the manual and automatic before printing the parts. One of the parts needs to be printed flat as it has a live hinge. I could try printing it upright and see what it happens. I have a new glass plate I am going to try to switch it and see.

Hi all! I can't seem to get my Ultimaker 3 to print everything perfectly. I am printing using PLA as my main material. It seems that the layers closer to the bed are always deforming in the same spot. I am running the latest version of Cura and I did a full maintenance of the printer last week - images 1&2 are before the maintenance setup and 3-6 are after the setup, which we can see that the situation is better but not fixed. I printed it with recommended settings and Fine (0.1mm) profile. Any ideas to what could be the issue? Thanks, Victor