JohnathanSmith1969

Which word would you like removed? Review this file below and let me know if this is what you need it https://www.tinkercad.com/things/lhWiSOvgcuG

I just installed the new version of Cura 3.3.1 and can someone please tell me the PrintHead Settings for Select Plus 3D Printer?

I had it working until the upgrade

I am using a Select Plus Printer... After upgrading to the Mac version of Cura 3.3.1 today I have a issue after every job my printer makes a banging sound, the filament breaks off and then I need to restart it to access the menus? Can it be something in my End Gcode? End Gcode: M117 Cooling down . . . M300 ;beep M104 S0 ;extruder heater off M140 S0 ;heated bed heater off (if you have it) G91 ;relative positioning G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more M106 S255 ;fan at 100% to cool nozzle G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way G90 ;absolute positioning G1 X100 Y190 ;move bed forward M84 ;steppers off M117 Cooling down . . . G4 P120000 ;wait 2 minutes (120 seconds) M106 S0 ;fan off M117 Finished!!! M300 ;beep

Can someone please help me get a Maker Select Plus 3D Printer setup in Cura pleseeeeee