Jump to content

curieux

Member
  • Posts

    26
  • Joined

  • Last visited

Posts posted by curieux


  1. I have installed a new firmware on the UM0. The firmware assumes that my UMO has a heatable bed.

    He did not and when printing now the UMO waits until it is heated - So never 😁

    Where do I get my old firmware e.g.15.02 again ?

    About a tool I created a hex file for Marlin ,  but there is also the heatable bed in it

    any link or attachement with verg old UMO firmware for me ?

  2. Hi

    Ich habe auf dem UM0 eine neue Firmware eingespielt . Die Firmware geht davon aus das mein UMO ein beheizbares bed hat

    Hat er nicht und beim Druck wartet er jetzt bis es aufgeheizt ist - Also niemals 😁

    Wo bekomme ich meine alte Firmware 15.02 wieder her ?

    Über ein Tool habe ich mir ein hex file für Marlin mal zusammengebauen lassen , aber da ist auch das beheizbare bed drin

     

     

  3. hi

    Ich suche einen Ultimaker 2go. Wenn jemand einen UM 2 Go zu verkaufen hat, bitte eine Nachricht an mich mit Preisvorstellung.

    email: curieux@web.de

     

    Vielen Dank

  4. What I understand :
    cura 4.0 has many options under machine settings -> for the parameter: "g-code flavor"  e.g.  ultimaker , reprap , marlin


    RepetierServer has only a few  under Firmware : e.g. marlin , reprap

    Both settings must be equal ,  so UM2+ starts printing .

     

    I tested both values "marlin" and "reprap" cura 4.0 . the result is UM2+ starts printing but the filament gets entangled. 

    the filament wraps around the nozzle.


    the same file sliced with g-code "ulitmaker" and saved on SD card works fine

    Question

    • Which option/parameter  did you choose for Cura and Repetier so that the result is the same like I'm just working with the SD card ?
    • And what is the startcode so that the filament comes out of the nozzle already before ?  when you chosse g-code marlin/reprap you have to put the code in the startcript, when you choose ultimaker in the g-code the UM2+  Firmware will do ist for you

    Regards

     

  5. Hi

    Hat jemand mit dem UM2+ und einer Solex 0.25. noozle mal was vernüftiges hinbekommen ?

    Bei mir löst sich das Objekt mit der Zeit vom Bett ab ( see attach)

     

    Wenn mir jemand mal seine Parameter verraten würde wäre das super  z.B.

    Filament ist von "extrudr"

     

    Extrusion Multiplexer
    Extrusion width
    Primary layer Height
     
    First Layer Height 130
      Default Printing Speed mm/min

    Ergebnis.jpg

  6. Hi,
    I can't get any reasonable results with your 0.25 mm noozle with my ultimaker 2+ .
    I use simplify3d for the slicing process.
    Does anybody have useful simplifyor Cura  parameters for me in conjunction with this noozle diameter ?
    e.g.
    Extrusion Multiplexer
    Extrusion width
    Primary layer Height
     
    First Layer Height 130
      Default Printing Speed mm/min
     
    The result is always the same wih different parameter ( see attach)
    the object is detached
     
    sincerely
    curieux

    Ergebnis.jpg

  7. Quote
    Quote
    Quote

    I forgot to say :

    I had the issue with UM2+ and ABS  . S3D was used as slicer program.

    Also support material was used

     

    The Cracks does not go around  see attach

     

     

     

    cracks1.jpg

×
×
  • Create New...