Jump to content

mauriziop

Dormant
  • Posts

    3
  • Joined

  • Last visited

Personal Information

  • 3D printer
    I have no 3D printer
  • Country
    IT
  • Industry
    Other

mauriziop's Achievements

0

Reputation

  1. Thank you lot. I have include the gcode commands as your indication, and now the first problem is OK. I have anather question is possible change this value ? G1 F1500 E-6.5 in to E10;LAYER_COUNT:101;LAYER:0G1 F1200 E-9.5 in to E0 Thank you
  2. Hello to all, I want to change the lines highlighted in yellow, are the gcode that cure has set by default, I have a custom printer fdm but I can not find which json file in the folder ? \ Program Files \ Ultimaker Cura 3.3 \ resources \ definitions I have to change, I tried to look in fdmextruder and fdmprinter but I did not find anything, can someone help me? Thanks for the time spent Maurizio ;FLAVOR:RepRap ;TIME:52841 ;Filament used: 0m ;Layer height: 0.2 ;Generated with Cura_SteamEngine 3.3.1 T1 M104 T1 S200 M109 T1 S200 M82 ;absolute extrusion mode ; Start GCode General ;Sliced at: Thu 17-05-2018 10:46:40 G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm ;M25 ;PAUSE G1 F{travel_speed} M83 ;relative extrusion mode G1 F1500 E-6.5 ;LAYER_COUNT:101 ;LAYER:0 G1 F1200 E-9.5 T1 M82 ;absolute extrusion mode ;Estrusore 1 T1 ;Switch to the 2nd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again
  3. Hello to all, I want to change the lines highlighted in yellow, are the gcode that cure has set by default, I have a custom printer fdm but I can not find which json file in the folder ? \ Program Files \ Ultimaker Cura 3.3 \ resources \ definitions I have to change, I tried to look in fdmextruder and fdmprinter but I did not find anything, can someone help me? Thanks for the time spent Maurizio ;FLAVOR:RepRap ;TIME:52841 ;Filament used: 0m ;Layer height: 0.2 ;Generated with Cura_SteamEngine 3.3.1 T1 M104 T1 S200 M109 T1 S200 M82 ;absolute extrusion mode ; Start GCode General ;Sliced at: Thu 17-05-2018 10:46:40 G21 ;metric values G90 ;absolute positioning M82 ;set extruder to absolute mode M107 ;start with the fan off G28 X0 Y0 ;move X/Y to min endstops G28 Z0 ;move Z to min endstops G1 Z15.0 F{travel_speed} ;move the platform down 15mm ;M25 ;PAUSE G1 F{travel_speed} M83 ;relative extrusion mode G1 F1500 E-6.5 ;LAYER_COUNT:101 ;LAYER:0 G1 F1200 E-9.5 T1 M82 ;absolute extrusion mode ;Estrusore 1 T1 ;Switch to the 2nd extruder G92 E0 ;zero the extruded length G1 F200 E10 ;extrude 10mm of feed stock G92 E0 ;zero the extruded length again
×
×
  • Create New...