tjarvstrand

I tried it out and it worked perfectly for my purposes. I'll probably be using this from now on, thanks a lot!

Hm, I'm not sure I follow what you mean. What is the problem? The end result in your image would in practice be more or less the same as in my initial stl right?

That sounds like a neat idea. I'll try it out! I'm attaching the stl without a brim. plate_insert.stl

Hi, I have a small print with which I'm having some problems with the build plate adhesion. I don't however want to use the standard Cura brim because I'm printing many of this part and I'm too lazy to deal with the post processing. There's only a specific part of the print which tends to come loose so I thought I would add my own brim which only touches on the outer edges of my print. It basically a hollow square where the hollow is a bounding square of my print. Cura, however completely ignores the brim, even though it shows up in the UI. I've tried making the 0.1mm and 0.2mm thick in the model but no luck. What am I doing wrong? costar_style_stabilizer2.stl