Jump to content
Ultimaker Community of 3D Printing Experts

FDM4Ever

Member
  • Content Count

    2
  • Joined

  • Last visited

Everything posted by FDM4Ever

  1. FDM4Ever

    Updated to 3.3.1; supports now print very slowly

    That will almost certainly be the issue - thank you ?
  2. Evening (or morning, afternoon), thanks for reading: I recently installed 3.3.1 and sliced with the profile imported from my 3.2.1 version - I don't believe anything changed, though I did pour over all the settings and nothing is standing out as an obvious cause of this problem: the outer and inner walls of my prints occur at my normal, expected rate (60mm/s). However, the infill and supports print at something approaching 1 or 2 mm/s. In Cura, my slowest print speed is reading at 30mm/s. This issue persists between printers and slicing different files with 3.3.1; files sliced with 3.2.1 print as expected. There's no issue for me to go back to 3.2.1, with the exception of relatively long response times on part movement - but I'm curious as to what would cause this issue and see if it's something easily solved. Appreciate any assistance, thanks in advance.
×

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!