FDM4Ever
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by FDM4Ever
-
-
Evening (or morning, afternoon), thanks for reading:
I recently installed 3.3.1 and sliced with the profile imported from my 3.2.1 version - I don't believe anything changed, though I did pour over all the settings and nothing is standing out as an obvious cause of this problem: the outer and inner walls of my prints occur at my normal, expected rate (60mm/s). However, the infill and supports print at something approaching 1 or 2 mm/s. In Cura, my slowest print speed is reading at 30mm/s.
This issue persists between printers and slicing different files with 3.3.1; files sliced with 3.2.1 print as expected.
There's no issue for me to go back to 3.2.1, with the exception of relatively long response times on part movement - but I'm curious as to what would cause this issue and see if it's something easily solved.Appreciate any assistance, thanks in advance.
Updated to 3.3.1; supports now print very slowly
in UltiMaker Cura
Posted
That will almost certainly be the issue - thank you ?