Jump to content

hodey

Dormant
  • Posts

    7
  • Joined

  • Last visited

Everything posted by hodey

  1. Hallo, leider haben ich bei CURA 4.0.0. durch ein fehler meine Profile gelöscht. Daher meine Frage, we ich die zurück bekommen. gemeint sind die Profile "Sprint","Fast" und "Extra fast". Hat wer eine Idee? Kann ich mir die irgendwo downloaden? Danke!
  2. Hallo in die Runde, ich habe diverse male das gleiche Objekt gedruckt und das Resultat ist immer gleich. Ich erhalte "Narben" an der oberfläche (Bild 1+2) . Diese Form wurde mit dem Ultimaker PP gedruckt. ähnlich Resultate erhalte ich bim Ultimaker Tough PLA. Wäre cool, wenn mir jemand helfen könnte bezüglich den Einstellungen und woran es liegen könnte. Anbei Bilder, Druckdatei und sonstige Dateien. UMS5_Testmodell fur 3D Druck Materialien.3mf Testmodell für 3D Druck Materialien.stl
  3. Hallo Makers of the Ultiworld! ich besitze den UM 5S und habe folgendse Problem. Der 3D-Drucker sowie Cura sind im Netz bzw. haben die gleiche IP zu erkennung. jedoch ist es nicht möglich, direkt aus CURA den UM 5S anzusteuern. Der Drucker wird erkannt, doch es nicht möglich eine Verbinung herzustellen. Daher muss ich das Update für den Drucker und den GCODE per USB-Stick transferieren. kennt wer das Problem und hat einen Lösungsansatz?
  4. Dear makers of the Ultiworld, I got a problem with my PLA? Or print core of the Ultimaker S5? I am using a regular PLA which is printable between 180-220 degree. However, the printer is printing some layers and than, the display shows: "Material seems to be empty. Please switch the material to continue with the job" something like that (it is German, see pictures below). But is NOT emtpy. Do you have an idea what went wrong? what can I do? I though to put somekind of a clip incl. oil on the back of the filament. So the material is oiled and can flow better into the print core.
  5. Dear Makers of the Ultiworld, I installed CURA on my new PC. Like before I wanted to slice and print(S5 printer) something. But now, if I choose the material Tough PLA for the extruder 1 and PVA for extruder 2, it dosen´t wok out. BUT on my old PC this combination is working, Can someone help me? It seems a bit ridiculous cuz that is the material combination which was sind with the S5 printer. THX
  6. Hello Makers of the Ultiverse, I am using a S5 Printer for my work. After a couple of printings, the BB print core with the PVA is on the outside of the nozzle black. It Looks a bit burned of the filament or some dirt of the black tough PLA. I dont know. For this, I want to clean the nozzle. Do you have some instructions how to clean it? Cotton swab with acetone maybe?
×
×
  • Create New...