Jump to content

jungle2go

Member
  • Posts

    5
  • Joined

  • Last visited

Everything posted by jungle2go

  1. You can get your new file on top with the following method. Rename the current file shown on top of the list on um display to a very long name (> 32 char) Copy your new file on the sd-card using a short name.
  2. I made a small change to to the um2 firmware for my ultimaker 2. Now someone on the other side of the world wants the same change but she has an ultimaker 2+ extended. I can not find any flags in the header files to make a build for the extended.
  3. I have an Ultimaker2 with Tinkergnome software. Recently i noticed strange behavior in the preheat menu. When I set the nozzle temperature to 10 degrees in the menu and i want to reset it to 0 with G-command "M104 S0" from USB, the setting goes to 160 degrees. In another case I saw it go to 200 degrees. I don't have the latest version of Tinker. I can not update because of partly broken USB-chip. Is this a known bug? If I send "M104 S1" it works fine. My response to M115: FIRMWARE_NAME:Marlin Ultimaker2; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://github.com/Ultimaker PROTOCOL_VERSION:1.0 MACHINE_TYPE:Ultimaker EXTRUDER_COUNT:1
  4. I downloaded and flashed Tinker-MarlinUltimaker2go-HBK-17.10.1.hex for my um2go to which I added a heated bed. Are there matching config header files for this version? I noticed that the heated bed is not powered continuously. Probably because of the smaller power supply. In my situation i have separate power supply for the heated bed. I want to make a small change so that the bed is powered continuously.
×
×
  • Create New...