Mavic

Na, dann muss ich wohl doch am WE probieren was da läuft.

So.... habe heute mal alle Treiber des Acer aktualisiert. Cura 3.4 lässt sich immer noch nicht starten. Also ist der Laptop wohl zu alt. Habe dann mal Cura 15.01 installiert und das läuft. Ist nur dumm, das ich dort nicht meinen Anycubic i3 Mega auswählen kann. In der 3.4 Version geht das wohl und man braucht sich mit der Grundeinstellung nicht abquälen. Was meint ihr, welche neuere Cura Version ich noch installieren könnte.Ich möchte nicht alle einzeln installieren und den LT zumüllen.

Habe ich mir schon fast gedacht....suche halt morgen mal nach einem neueren Treiber.

Laptop ist ein Acer Aspire 5735Z und hat wie ich weiß nur eine Grafikkarte.Ich schau aber nochmal nach. Ich suche morgen mal nach neuen Treibern für die Grafikkarte.Als Administrator ausführen hatte ich auch schon versucht. Melde mich dann wieder. Wünsche noch einen schönen Abend.

Jepp... danke das funktioniert prima. 2018-08-29 17:02:16,988 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin ConsoleLogger 2018-08-29 17:02:17,082 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.__init__ [72]: Found CuraEngine at: C:\Program Files\Ultimaker Cura 3.4 neu\CuraEngine.exe 2018-08-29 17:02:17,097 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin CuraEngineBackend 2018-08-29 17:02:17,144 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin CuraProfileReader 2018-08-29 17:02:17,175 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin CuraProfileWriter 2018-08-29 17:02:17,222 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin OBJReader 2018-08-29 17:02:17,269 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin OBJWriter 2018-08-29 17:02:17,378 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin STLReader 2018-08-29 17:02:17,425 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin STLWriter 2018-08-29 17:02:17,487 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin FileLogger 2018-08-29 17:02:17,690 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin FirmwareUpdateChecker 2018-08-29 17:02:17,784 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin GCodeGzReader 2018-08-29 17:02:17,830 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin GCodeGzWriter 2018-08-29 17:02:17,908 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin GCodeProfileReader 2018-08-29 17:02:18,064 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin GCodeReader 2018-08-29 17:02:18,158 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin GCodeWriter 2018-08-29 17:02:18,267 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin ImageReader 2018-08-29 17:02:18,345 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin LegacyProfileReader 2018-08-29 17:02:18,439 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin LocalContainerProvider 2018-08-29 17:02:18,564 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin LocalFileOutputDevice 2018-08-29 17:02:18,720 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin MachineSettingsAction 2018-08-29 17:02:18,829 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin ModelChecker 2018-08-29 17:02:18,922 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin MonitorStage 2018-08-29 17:02:19,000 - WARNING - [MainThread] UM.Preferences.getValue [91]: Tried to get the value of non-existing setting cura/active_mode. 2018-08-29 17:02:19,016 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin PerObjectSettingsTool 2018-08-29 17:02:19,094 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin PostProcessingPlugin 2018-08-29 17:02:19,172 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin PrepareStage 2018-08-29 17:02:19,281 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin RemovableDriveOutputDevice 2018-08-29 17:02:19,422 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SimulationView 2018-08-29 17:02:19,531 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SliceInfoPlugin 2018-08-29 17:02:19,609 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SolidView 2018-08-29 17:02:19,687 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SupportEraser 2018-08-29 17:02:19,827 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin Toolbox 2018-08-29 17:02:19,936 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin CameraTool 2018-08-29 17:02:20,046 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin MirrorTool 2018-08-29 17:02:20,124 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin RotateTool 2018-08-29 17:02:20,248 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin ScaleTool 2018-08-29 17:02:20,326 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SelectionTool 2018-08-29 17:02:20,404 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin TranslateTool 2018-08-29 17:02:20,498 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin UFPWriter 2018-08-29 17:02:20,607 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin UltimakerMachineActions 2018-08-29 17:02:21,075 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin UM3NetworkPrinting 2018-08-29 17:02:21,231 - INFO - [Thread-3] UpdateChecker.UpdateCheckerJob.run [34]: Checking for new version of cura 2018-08-29 17:02:21,262 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin UpdateChecker 2018-08-29 17:02:21,543 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin USBPrinting 2018-08-29 17:02:21,652 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin UserAgreement 2018-08-29 17:02:21,777 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade21to22 2018-08-29 17:02:21,871 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade22to24 2018-08-29 17:02:21,964 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade25to26 2018-08-29 17:02:22,058 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade26to27 2018-08-29 17:02:22,136 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade27to30 2018-08-29 17:02:22,230 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade30to31 2018-08-29 17:02:22,323 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade32to33 2018-08-29 17:02:22,417 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin VersionUpgrade33to34 2018-08-29 17:02:22,510 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin SimpleView 2018-08-29 17:02:22,620 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin X3DReader 2018-08-29 17:02:22,729 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin XmlMaterialProfile 2018-08-29 17:02:22,822 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [431]: Loaded plugin XRayView 2018-08-29 17:02:22,885 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [124]: Looking for old configuration files to upgrade. 2018-08-29 17:02:22,900 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [2000000], no upgrade task for it from type [preferences]. 2018-08-29 17:02:22,900 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:22,916 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:22,916 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:22,932 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:22,932 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [4000000], no upgrade task for it from type [preferences]. 2018-08-29 17:02:22,947 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:22,947 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:22,947 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:22,963 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:22,963 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [4000001], no upgrade task for it from type [preferences]. 2018-08-29 17:02:22,978 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:22,978 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:22,994 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:22,994 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:23,010 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [4000002], no upgrade task for it from type [preferences]. 2018-08-29 17:02:23,010 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:23,025 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:23,025 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:23,025 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:23,041 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [5000003], no upgrade task for it from type [preferences]. 2018-08-29 17:02:23,056 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:23,056 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:23,056 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:23,072 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:23,072 - INFO - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [272]: Config file [.\cura.cfg] is of version [6000000], which is different from the defined version [5000004], no upgrade task for it from type [preferences]. 2018-08-29 17:02:23,088 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\cura.log, skip it 2018-08-29 17:02:23,088 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\packages.json, skip it 2018-08-29 17:02:23,103 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\plugins.json, skip it 2018-08-29 17:02:23,103 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [275]: Failed to get file version: .\uranium.lock, skip it 2018-08-29 17:02:23,134 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [177]: Socket state changed to Listening 2018-08-29 17:02:23,166 - INFO - [MainThread] UM.Backend.Backend.startEngine [74]: Started engine process: C:\Program Files\Ultimaker Cura 3.4 neu\CuraEngine.exe 2018-08-29 17:02:23,181 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [94]: [Backend] Calling engine with: ['C:\\Program Files\\Ultimaker Cura 3.4 neu\\CuraEngine.exe', 'connect', '127.0.0.1:49674', '-j', 'C:\\Program Files\\Ultimaker Cura 3.4 neu\\resources\\definitions\\fdmprinter.def.json', ''] 2018-08-29 17:02:23,431 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] 2018-08-29 17:02:23,446 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] Cura_SteamEngine version 3.4.1 2018-08-29 17:02:23,446 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] Copyright (C) 2018 Ultimaker 2018-08-29 17:02:23,446 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] 2018-08-29 17:02:23,462 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] This program is free software: you can redistribute it and/or modify 2018-08-29 17:02:23,462 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [181]: Socket state changed to Connected 2018-08-29 17:02:23,478 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [171]: Backend connected on port 49674 2018-08-29 17:02:23,478 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] it under the terms of the GNU Affero General Public License as published by 2018-08-29 17:02:23,493 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [empty_definition_changes] added. 2018-08-29 17:02:23,493 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] the Free Software Foundation, either version 3 of the License, or 2018-08-29 17:02:23,509 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [empty_variant] added. 2018-08-29 17:02:23,509 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [empty_material] added. 2018-08-29 17:02:23,524 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [empty_quality] added. 2018-08-29 17:02:23,524 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] (at your option) any later version. 2018-08-29 17:02:23,524 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] 2018-08-29 17:02:23,540 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] This program is distributed in the hope that it will be useful, 2018-08-29 17:02:23,540 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of 2018-08-29 17:02:23,540 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 2018-08-29 17:02:23,556 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] GNU Affero General Public License for more details. 2018-08-29 17:02:23,556 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] 2018-08-29 17:02:23,571 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] You should have received a copy of the GNU Affero General Public License 2018-08-29 17:02:23,571 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [empty_quality_changes] added. 2018-08-29 17:02:23,571 - DEBUG - [Thread-8] UM.Backend.Backend._backendLog [94]: [Backend] along with this program. If not, see <http://www.gnu.org/licenses/>. 2018-08-29 17:02:30,045 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [103]: Select build plate: 0 2018-08-29 17:02:30,061 - INFO - [MainThread] cura.CuraApplication.run [677]: Initializing variant manager 2018-08-29 17:02:30,076 - DEBUG - [MainThread] cura.Machines.VariantManager.initialize [67]: Exclude variant [empty_variant] 2018-08-29 17:02:30,076 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [52]: Loading container ultimaker_s5_aluminum 2018-08-29 17:02:30,092 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [ultimaker_s5_aluminum] added. 2018-08-29 17:02:30,108 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [52]: Loading container ultimaker_s5 2018-08-29 17:02:30,310 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [ultimaker_s5] added. 2018-08-29 17:02:30,326 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [52]: Loading container ultimaker_s5_glass 2018-08-29 17:02:30,342 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [ultimaker_s5_glass] added. 2018-08-29 17:02:30,357 - INFO - [MainThread] cura.CuraApplication.run [681]: Initializing material manager 2018-08-29 17:02:30,638 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_hips_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,654 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_arnitel2045_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,654 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pla_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,669 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_novamid1070_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,685 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pla_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,685 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_novamid1070_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,700 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_nylon_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,716 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_hips_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,716 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_abs_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,732 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_nylon_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,732 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pva_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,747 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pc_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,763 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_hips_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,763 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pc_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,778 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_petg_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,778 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pva_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,794 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_nylon_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,810 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pc_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,825 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_abs_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,825 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_petg_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,841 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pva_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,856 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_abs_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,856 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_novamid1070_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,872 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_pla_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,888 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding generic_petg_175_cartesio_0.8mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,888 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_arnitel2045_175_cartesio_0.4mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,903 - WARNING - [MainThread] cura.Machines.MaterialManager.initialize [230]: Not adding dsm_arnitel2045_175_cartesio_0.25mm_thermoplastic_extruder to the material manager because the variant does not exist. 2018-08-29 17:02:30,919 - INFO - [MainThread] cura.CuraApplication.run [686]: Initializing quality manager 2018-08-29 17:02:30,966 - DEBUG - [MainThread] cura.Machines.QualityManager.initialize [145]: Lookup tables updated. 2018-08-29 17:02:30,966 - INFO - [MainThread] cura.CuraApplication.run [691]: Initializing machine manager 2018-08-29 17:02:30,981 - INFO - [MainThread] cura.CuraApplication.run [694]: Initializing machine error checker 2018-08-29 17:02:37,783 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [256]: Creating post processing plugin view. 2018-08-29 17:02:37,830 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [BQ_PauseAtHeight] added. 2018-08-29 17:02:37,830 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136262824] added. 2018-08-29 17:02:37,830 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: BQ_PauseAtHeight 2018-08-29 17:02:37,892 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [ChangeAtZ] added. 2018-08-29 17:02:37,908 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136265568] added. 2018-08-29 17:02:37,908 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: ChangeAtZ 2018-08-29 17:02:37,923 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [ExampleScript] added. 2018-08-29 17:02:37,939 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136265344] added. 2018-08-29 17:02:37,939 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: ExampleScript 2018-08-29 17:02:37,970 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [FilamentChange] added. 2018-08-29 17:02:37,970 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136342552] added. 2018-08-29 17:02:37,970 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: FilamentChange 2018-08-29 17:02:38,017 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [PauseAtHeight] added. 2018-08-29 17:02:38,017 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136340648] added. 2018-08-29 17:02:38,017 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: PauseAtHeight 2018-08-29 17:02:38,048 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [PauseAtHeightforRepetier] added. 2018-08-29 17:02:38,064 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [136342888] added. 2018-08-29 17:02:38,064 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: PauseAtHeightforRepetier 2018-08-29 17:02:38,079 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [SearchAndReplace] added. 2018-08-29 17:02:38,095 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [183626216] added. 2018-08-29 17:02:38,095 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: SearchAndReplace 2018-08-29 17:02:38,142 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [Stretch] added. 2018-08-29 17:02:38,142 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [87030920] added. 2018-08-29 17:02:38,142 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [155]: Begin loading of script: Stretch 2018-08-29 17:02:39,608 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [172]: Loading theme file: C:\Program Files\Ultimaker Cura 3.4 neu\resources\themes\cura-light\theme.json 2018-08-29 17:02:40,778 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [244]: Loaded theme C:\Program Files\Ultimaker Cura 3.4 neu\resources\themes\cura-light 2018-08-29 17:02:41,043 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [263]: Post processing view created. 2018-08-29 17:02:42,244 - DEBUG - [MainThread] LocalContainerProvider.LocalContainerProvider.loadContainer [52]: Loading container fdmprinter 2018-08-29 17:02:42,447 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.addContainer [369]: Container [fdmprinter] added. 2018-08-29 17:02:42,510 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [15]: Updating CustomQualityProfilesDropDownMenuModel. 2018-08-29 17:02:42,525 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [20]: No active GlobalStack, set CustomQualityProfilesDropDownMenuModel as empty. 2018-08-29 17:02:42,525 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [50]: Updating QualityProfilesDropDownMenuModel. 2018-08-29 17:02:42,541 - DEBUG - [MainThread] cura.Machines.Models.QualityProfilesDropDownMenuModel._update [55]: No active GlobalStack, set quality profile model as empty. 2018-08-29 17:02:43,711 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getColor [101]: No color black defined in Theme 2018-08-29 17:02:45,375 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Topbar.qml:19: TypeError: Cannot read property 'stageId' of null 2018-08-29 17:02:45,384 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Topbar.qml:104: TypeError: Cannot read property 'stageId' of null 2018-08-29 17:02:45,392 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Topbar.qml:175: TypeError: Cannot read property 'stageId' of null 2018-08-29 17:02:45,400 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Cura.qml:433: TypeError: Cannot read property 'mainComponent' of null 2018-08-29 17:02:45,408 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Cura.qml:427: TypeError: Cannot read property 'mainComponent' of null 2018-08-29 17:02:45,416 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Cura.qml:465: TypeError: Cannot read property 'sidebarComponent' of null 2018-08-29 17:02:45,424 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/Cura.qml:497: TypeError: Cannot read property 'sidebarComponent' of null 2018-08-29 17:02:45,464 - DEBUG - [MainThread] UM3NetworkPrinting.DiscoverUM3Action._createAdditionalComponentsView [166]: Creating additional ui components for UM3. 2018-08-29 17:02:45,957 - DEBUG - [MainThread] UM3NetworkPrinting.DiscoverUM3Action.startDiscovery [39]: Starting device discovery. 2018-08-29 17:02:46,139 - DEBUG - [MainThread] UM.Controller.setActiveStage [164]: Setting active stage to PrepareStage 2018-08-29 17:02:48,171 - DEBUG - [MainThread] cura.Machines.Models.GenericMaterialsModel._update [23]: Updating GenericMaterialsModel. 2018-08-29 17:02:48,185 - DEBUG - [MainThread] cura.Machines.Models.BrandMaterialsModel._update [86]: Updating BrandMaterialsModel. 2018-08-29 17:02:48,196 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [32]: Updating NozzleModel. 2018-08-29 17:02:48,295 - DEBUG - [MainThread] cura.Machines.Models.BuildPlateModel._update [33]: Updating BuildPlateModel. 2018-08-29 17:02:48,525 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [301]: file:///C:/Program Files/Ultimaker Cura 3.4 neu/resources/qml/SidebarHeader.qml:546:9: QML : Binding loop detected for property "width" 2018-08-29 17:02:48,613 - DEBUG - [MainThread] UM.Controller.setActiveView [97]: Setting active view to SolidView 2018-08-29 17:02:48,624 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [97]: Creating model checker view. 2018-08-29 17:02:48,690 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [106]: Model checker view created. 2018-08-29 17:02:48,693 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [77]: Creating dialog [MoreInfoWindow.qml] 2018-08-29 17:02:48,983 - DEBUG - [MainThread] cura.CuraApplication.run [723]: Booting Cura took 33.671550273895264 seconds

Nein ich habe ja die stderr.log DOS Fenster. Ich kann sie dort nur nicht öffnen, um sie dann zu kopieren und hier einzustellen.

Hab mich wohl verkehrt ausgedrückt. Ich bekomme die stderr.log im DOS Fenster nicht geöffnet und kann sie dort auch nicht herauskopieren.

hallo, habe die stderr.log nun gefunden,kann sie aber nicht in Word pad ausgeben und hier einstellen.

N'abend, ich finde leider keine stderr.log. Da ist nur eine stderr.Ink. Diese kann ich aber nicht rauskopieren. Wrote sowie Notepad gehen nicht.

@zerspaner_gerd Nein habe keine 2. Grafikkarte im Laptop.Poste morgen mal die stderr.log

Danke, geht schon wieder.Ich Check das morgen noch mal, ob das mit dem Open GL2 passt. Wünsche einen schönen Abend.

Hallo, sorry hatte gestern mit Magen+Darm zu kämpfen. Habe Cura 3.4.1 neu installiert, nachdem ich vorher alles Alte von cura gelöscht habe.Der gleiche Fehler "Kann cura.exe nicht starten" ist geblieben. Hier die cura.log Datei im Anhang. cura.log

So... alles gelöscht.Bin extra auch noch mal mit dem CC Cleaner drüber gegangen.In der Datenträgerverwaltung ist kein Datenträger "X". Dort ist nur meine Festplatte und das CD Laufwerk.

@ JoergS5 Ich lösche jetzt erstmal alles wie von Gerd vorgeschlagen. Installiere dann die Cura 3.4.1 und melde mich morgen. Habe jetzt leider keine Zeit mehr.

Ich hatte beide probiert, aber bei beiden das gleiche Problem. Zuletzt war dann die 3.2 installiert. Soll ich jetzt noch versuchen eine ältere zu installieren?