jeb1
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by jeb1
-
I know at least for PETG if you cool the bed, the print can pop off I keep the bed hot for the whole print
-
you can enter almost any measurement into fusion, I sometimes use mm and sometimes inches
-
fusion 360 just added display in both units, I love that
-
I have 0.6 nozzle in printer specs and 0.3 layers, sometimes when starting it picks either 1.0 or 1.2 line width to use and will not use the specs I chose I close it and restart it and it has my specs, so odd
-
it is all about layers, so layer scheme
-
in color scheme? found it, but that wording makes no sense
-
in preview, I can't find how to view just the infill or support
-
curious, running the print with a 1mm nozzle resulted in very little infill, running with 0.5mm nozzle had lots so not sure why
-
I did reinstall 3.4.1 and it did the same thing, so I'm lost the model is solid I'll check other things big bearing block.stl
-
all I did was install the new version, all settings were the same
-
I told it 75% infill, it looked like 10% is there some new infill option to fix this? it worked under 3.4.1
