Jump to content
Ultimaker Community of 3D Printing Experts


  • Content Count

  • Joined

  • Last visited

Posts posted by aag

  1. Not sure I understand. Obviously the printer knows when it stalls. It tells so via the display, and you can check it on the app as well.  Why would be so complex to send a notification, e.g. by executing a custom script?


    We have a bunch of $100 surveillance cameras that send all kinds of selectable alerts (including push notification and emails) when they detect movement. There is even a completely free Raspberry software (MotionEye) that offers movement notification either by email, or a by web hook, or by execution of a script. Regrettably, it detects "movement" rather than "absence of movement", or else I would install it on top of my UM5S and be done!


    The whole point of having a networked printer is remote monitoring. Without some kind of heartbeat alert, all you can do with the network is to send files to the printer.

  2. I am getting very frequent tPLA underextrusion on my S5, resulting in halted prints (if the flow sensor is on) or ruined print (if the flow sensor is off). I have replaced both the prinhead and the bowden tube, and I have cleaned the feeder many times. None of this has resolved the issue.

    Now I have noticed that the part of the filament entering the upper part of the printhead has an increased diameter, suggesting that it was partially molten. I think that this may indicate that the temperature creeps up from the nozzle to the upper metal tube. If true, this might indicate that the side fan is not working. But it's difficult to see the fins of the side fan, even with a flashlight. Is there a way to test the functionality of the side fans?





  3. This thingy https://www.thingiverse.com/thing:4256347 is supposed to deliver a flexible hygiene mask holder by avoiding to print the top/bottom layers. The STL has tops and bottoms, but the instructions say to print it without them, such that the hex infill will become visible. With Cura, however, I cannot find a way to do that. If I set Layer thickness to zero, it marks it as error. Is there a way to do that?


  4. I am frequently getting the dreaded message: "One material appears to be empty" (which in reality means: "the Hall sensor in the feeder is not detecting any filament movement"). I have cleaned and inspected the feeder, replaced the  Bowden, and of course checked the filament. Can this be a sign that the printhead is worn out and needs to be replaced?

  5. Thanks a million Erin!!! BTW, may I accede to your kind help again with a related question? Since a few days, the S% is making rattling noises. Rat-rat-rat-rat-rat-rat at approx. 2-3 Hz frequency. It seems to come from the upper front-left corner, maybe from a pulley. Does this ring any bell?

  6. Thank you, this is very helpful! However, it begs the question of what is the least-cumbersome way to remove the guiding bars. I guess that it is probably best to

    • first uninstall the the printhead and its axes
    • then unscrew the side walls in order to take off the guiding bars
    • then remove one cogwheel from the guiding bar,
    • then slide in the black slider?

    right? 🙂

  7. The UMS5 has a black thingy (don't know how it's called) into which the axis snaps. It no longer snaps though. Maybe the side retainers (made of plastic) are worn. Might somebody explain to me how to remove and replace it? 🙂
    I would be immensely grateful!


  8. I had one feeder replaced on warranty, and that eliminated the issue. The filament channel within the feeder can become worn out pretty badly: the knurled wheels of the feeder are of hard metal but everything else is wobbly plastic. It would be nice if some third-party would be a more sturdy replacement feeder, all in metal.

  9. On long prints, my S5 loses periodically its internet connection (ethernet cable). The first few hours of any print are OK, then I start getting messages on the browser that "the printer cannot be reached" and that "no detailed information is available". That goes for a few minutes, then the printer reappears - for a while - and then it disappears again. The printer is pingable at all times, and the video stream from the camera is always available. I wonder whether I am the only one with this issue.



  10. Let's say, I start a print on a UM S5 with Tough PLA, and I run out of filament at half of the print. Can I go through the filament change procedure, but load something else than Tough PLA? The printer asks me what material I am loading, so in principle I presume that I could do that. But when Cura had sliced and sent off the g-code, it assumed that everything would be printed with Tough PLA. Is that going to be an issue?

  11. Since very recently, I often receive this message from Cura Connect. I wondered whether this may be a hardware issue of the LAN network (the printer is hardwired with Ethernet). However the video stream from the webcam continues to work OK even when the printer is supposedly "unreachable". Hence I now suspect a firmware issue/bug. Any ideas?


  • Create New...