ibd
-
Posts
2 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by ibd
-
-
I'm running into the same problem with my Geeetech A10M + Cura.
I have attached a sample file exhibiting the problem. I have yellow color mounted on the second extruder, so I sliced this yellow model to be printed using the second extruder. However, the nozzle turns off after printing the skirt.
I will look into the source code next to find out where the erroneous M104 is emitted.
In the meantime, a workaround is to run a postprocessing script that replaces "m104 t0 s0", "m104 t1 s0", and so on, with an empty string.
Trying to "present" print after finished, but Y = -10 so cannot move
in UltiMaker Cura
Posted
I'm trying to "present" the finished print by inserting appropriate move codes at the end of the gcode file.
My end gcode includes this:
G91 ; relative positioning G1 E-1 F300 ; retract the filament a bit before lifting the nozzle, to release some of the pressure G1 Z+0.5 E-2 F1500 ; move Z up a bit and retract filament even more G90 ; absolute positioning G0 X0 Y220 ; present print
However, the bed does not move forward. If I try to move the Y axis manually, I see the current position after the print is negative (Y=-10), so it will for example refuse to move in 1mm steps. I suspect this also blocks the move command.
How can I fix this?