Jump to content

KSSE

Dormant
  • Posts

    1
  • Joined

  • Last visited

Posts posted by KSSE

  1. I'm using the Ultimaker 2, and I changed the value of the printing temperature to 220°C, because it didn't print at 210°C, so all the print setup is like this:

    Layer height: 0.15mm

    Priting temperature: 220°C

    Build Plate temperature: 60°C

    Print speed: 42 mm/s

    So with this values I printed the 3D Benchy, but the layers are not looking good.

    20181205_122900.thumb.jpg.6bc78bb71e37d623d3fd61825d3e6640.jpg20181205_122948.thumb.jpg.a2f103a6641cac60bc5685c654c999c7.jpg

    I didn't care that it looked like that, beacause at least it was printing. So I tried to print a bigger piece that was like a cone, with 180mm of the maximum diameter, but it failed at 7mm of height and stopped printing.

    My next attempt was this piece, that is below, with this print setup:

    Layer height: 0.15mm

    Priting temperature: 230°C

    Build Plate temperature: 60°C

    Print speed: 30 mm/s

    But it keeps priting bad quality of layers, so I don't know what can be wrong with the printer or the print setup.

    20181205_130150.thumb.jpg.ba3a5e86809e382c2d5cba800dd03160.jpg 20181205_130211.thumb.jpg.4936604b62c150785ba76824c720d5c7.jpg

     

    20181205_130211.jpg

    20181205_130150.jpg

×
×
  • Create New...