Hi everyone! I'm having a weird behavior with CURA 3.6 and spiralize (vase mode).
Some layers are missing, replaced by a straight line... (see the pictures)
I'm using a very classic profile, execpt for the spiralize outer contour mode.
CURA 3.6
--> Layer display shows some missing or partially missing layers
--> If I print like this, yes, the problem is visible in the part
--> If I move down the part in CURA to print only the top of my piece, to make a quick test on where the problem is, well, no more problem displayed in CURA and the print is ok, the problem disappear! (but it reappears as soon as I try to print the whole part)
CURA 3.4.1
--> No problem at all!! (with the exact same profile)
After looking everything, I wanted to try other older versions to see where the problem is, and check if the problem comes from CURA 3.6 or my STL. CURA 3.5 and 3.5.1 have the same problem, but with CURA 3.4.1, no problem at all, all my layers are here!
Does anyone have any idea about this problem? Is it a known bug?
Thanks in advance for your answers!