Jump to content

cyclepath

Member
  • Posts

    8
  • Joined

  • Last visited

Everything posted by cyclepath

  1. Hi Smithy, My IT dept. will not let this be downloaded as it was flagged by VirusTotal for malware.
  2. Thank you so much! We have successfully updated ours with this tuner.
  3. Our s5 has the same issue with waiting to reprint once the bedplate has cooled down to 59C. We run a lot of polypropylene with a 80C bed temp, so this causes a lot of wasted time. Extremely frustrating, and having us looking to end our relationship with Ultimaker.
  4. I rebooted it 4 times and the first 3 times it sat on the ultimaker screen for ~30 min before I rebooted it again. The 4th time it booted up properly
  5. My S5 did this yesterday when updating from 6.2.1 to 7.0.2 It popped up on the screen saying an update was available, so I initiated it. Is this something I need to contact UM customer service for? VERY Frustrated
  6. I plan to try the salt method, but I currently use a raft of ultimaker break-away material under the PETG all on top of a PEI adhesion sheet. https://catalog.cshyde.com/item/3d-printing-materials/ultem-pei/36-10a-3d-12-5x-13-5
  7. My S5 also seems to be making extra moves. After a bed level fail, it seems to make the homing switches several times. I also struggle with keeping the oozing while the initial bed level. I wish the nozzle switch would check a few mm away from the previous nozzle check and not directly on the oozed material.
  8. 3.6.0 is also crashing on my win 8.1 @ startup. Tried running in win 8 compatibility mode. Still crashes.
×
×
  • Create New...