[Ultimaker 3 Extended:Hangs when updating]

4 minutes ago, Smithy said:

Ok, that's not good, and if the printer don't start normally you are not able to update with the correct firmware. Maybe someone else has another idea, but without a serial cable like this (https://thegr5store.com/store/index.php/um3upg/usb-serial-cable-f.html) I don't know any other possibilities to unbrick the printer.

for this will have to disassemble?

[Ultimaker 3 Extended:Hangs when updating]

2 minutes ago, Smithy said:

Попробуйте, если это поможет, когда вы выключите его полностью и снова.

Just done it, turned it off and on. USB is not inserted. On the logo screen, the button is green

[Ultimaker 3 Extended:Hangs when updating]

2 minutes ago, Smithy said:

Вы пробовали, если принтер запускается нормально, если вы выключите его и снова включите? 

Или вы имели в виду, что он сейчас застрял на логотипе после перезагрузки?

After preloading, it hangs on the logo

[Ultimaker 3 Extended:Hangs when updating]

After preloading, it hangs on the logo

[Ultimaker 3 Extended:Hangs when updating]

Hello everyone, I wanted to update the 3D printer. But I mistakenly chose the firmware files from S5 on the USB and the lights were turned off during the update (now it shows the logo all the time and the encoder is green.